Cement grout mixing and storage combination for household construction

Cement grout mixing and storage combination for household construction, ultrafine cement, bentonite, and other mixtures for hydroelectric dam projects. Mixing tank capacities are available from 300L, 400L, 450L to 700L. With excellent mixed quality, large capacity, energy saving, strong strength, and low wear. Cement grout mixing and storage combination for household construction is widely used in underground / underground engineering and construction.

We are a professional cement grout mixing and storage combination for household construction suppliers and always provide the right hydraulic grout mixers and solutions. For more information on cement grout mixing and storage combination, please email us.

In order to provide the best model cement grout mixing and storage combination as soon as possible, please let us know when you contact us:
1.what material will you mixing, cement, water? Whether has other additive?
2.what’s the W/C ratio? >0.45:1?
3. what’s the capacity do you need?
4.would you like the high shear cement grout mixer with electric motor or diesel engine?
If you need a motorized hydro dam project grout mixer, what is the voltage on your site’s hydro dam project grout mixer, three-phase, 380v, 50HZ, etc.?
5. Are there any requirements for the color of the high shear cement grout machine?
Cement grout mixing and storage combination are typically yellow, blue, and white. If you need other colors, please tell me the color code as well.
After confirming the answers to the above questions, we will provide the best price for grout machine models and suitable grout machines for hydro dam projects as soon as possible.

The operating procedure of the cement grout mixing and storage combination is as follows.
1.Check if the stirring impeller is correct and make sure there are no leaks in the slurry pipe.
2. Add an appropriate amount of water, start the device, wash and wet the bucket and pipe to be beaten, and drain the water to the tapping machine after cleaning.
3. Add 80 kg or more of water, start the beater and add the powder evenly in the specified order. Feeding time is controlled within 5-6 minutes. After adding the powder, continue stirring for 3-5 minutes.
4. Transport the prepared slurry to the slurry storage tank to maintain dynamic slurry storage.
5. Start grouting after connecting the grout machine pipe to the slurry storage bucket or transporting it directly to the grout machine hopper.
6.Clean the equipment and pipeline immediately after injecting the grout and start the pulper so that the cement slurry remaining in the pulper and pipeline can be recycled.
If you have any questions, please feel free to contact us.Email:sales@wodetec.com