China cement grouting mixer with agitator machine for sale
China cement grouting mixer with agitator machine for sale are also used in the construction of hydropower, railroads, highways, construction, mining, and other industries. We can quickly mix grout or squeezer, cement, and water into the slurry. Compared to common grout mixers, cement grouting mixer with agitator machine for sale features high pulping efficiency, easy operation, uniform slurry, and short-distance transport capabilities.
When the cement grouting mixer with agitator machine for sale is activated, cement and water are added proportionally to the pulping cylinder, and the material in the cylinder flows at high speed and evenly by the action of the pulping pump, and the prepared slurry flows in. Storage cylinder via the valve. A stirring paddle is attached to the storage barrel to prevent the slurry from settling.
Functions of cement grouting mixer with agitator machine for sale:
- High efficiency and large reserves. It can be applied to various grout injections.
- Engineering work.
- Safe and reliable; key component motors have a high level of protection.
The mixing arm of the storage tank adopts high strength, strong force, and frame modification structure without deformation.
Safe operating procedure for cement grouting mixer with agitator machine for sale:
(1) It is necessary to select an appropriate distributed disk and mixing head according to the work requirements. To replace the distributed disc or mixing head: First loosen the nut at the bottom of the distributed disc with a wrench, remove the distributed disc to be replaced, and then replace it with a new one. The upper distributed disc is screwed into the driveshaft.
(2) After turning on the power, turn on the power switch, turn the speed control knob of the motor to the right to start rotation slowly, and turn the motor to the left to decelerate slowly. If the rotation speed is high, the stir bar will shake slightly, but it will not affect the use under normal conditions. Note: The mixing head of this machine is strictly prohibited from leaving the material in motion.
(3) After finishing the work, return the governor to 0, turn off the power switch, turn off the power, and unplug it.
(4) After use, the grout mixer machine for drills needs to be cleaned in time.
When cleaning the cement grouting mixer with agitator machine, the residual cement slurry should be thoroughly cleaned to prevent residual agglomeration that can cause equipment failure during the next use. After cleaning the grout mixer for the drill, add grease to the grease holes to extend the useful life of the internal seal of the transmission assembly.
If you are interested in a cement grouting mixer with agitator machine, please contact us. Email: sales@wodetec.com