Factory direct sale cement grout mixer and storage machine Indonesia

Factory direct sale cement grout mixer and storage machine Indonesia is grouting cement mixer for sale, grouting cement mixer makes mixing efficient and beneficial to the owner. Materials such as cement, water, bentonite, and additives are pumped through a high-speed impeller pump with a pump speed of 1500 rpm to prevent caking and achieve complete wetting. The stirring time is only 2-3 minutes, saving time and cost. The cement grout mixer and storage machine in Indonesia increase the apparent fluidity of the grout mixture by 20% over paddle mixers, providing significant benefits for the dam, rock, soil grouting, and more.We sell all kinds of grouting cement mixers and have rich experience in the use and precautions of grouting cement mixers.

Instructions for use of factory direct sale cement grout mixer and storage machine Indonesia:

1..Check and fix the stirring impeller to ensure that the slurry pipe does not leak.

2.Add an appropriate amount of water, start the equipment to clean and moisten the beating barrel and pipes, and drain the water into the beating machine after cleaning.

3.Add more than 3.80 kg of water, start the pulping machine, add the powder evenly in the specified order, control the feeding time within 5-6 minutes, and continue to stir for 3 to 5 minutes after all the powder is added.

4.Transport the prepared slurry to the slurry storage tank to maintain dynamic slurry storage.

5.Connect the grout machine pipe to the grout bucket or directly into the grout machine hopper before grouting.

Factory direct sale cement grout mixer and storage machine Indonesia Maintenance:

1.Before starting the machine, make sure that the moving parts are not blocked by hand, and that the connections are fixed everywhere. Then you can turn the machine on and idle it. Pay attention to other abnormal conditions of the equipment during operation (continue to add water to the transmission assembly for cooling during operation), so that the motor rotates clockwise from the connecting shaft of the transmission assembly, pay special attention.

2.Regularly check whether 3# basic grease is added to the gearbox assembly.

3.Avoid long-term idling of the circulating pump, and exclude large hard particles and easy-to-roll strips from the circulating pump.

4.When cleaning the grouting cement mixer, the valves at the bottom of the slurry bucket and the bottom of the circulating pump should be opened to completely discharge the residual grout, so as not to harden and affect the working efficiency of the equipment.

5.Regularly adjust the tightness of the packing seal of the pump group. It is recommended to drip a small amount of water from the box. Excessive compression can affect the life of the packing and the efficiency of the equipment.

If you want to know the price of a direct sale cement grout mixer and storage machine in Indonesia, please feel free to contact us.Email:sales@wodetec.com