Grout mixer and storage machine for sale Canada

Grout mixer and storage machine for sale in Canada is mainly driven by electric motors. The pulp is sucked from the bottom in the vortex mode and discharged from the top end of the barrel to create a high-speed liquid flow, forming a powerful vortex inside the barrel, and the dry powder and water are well agitated and evenly mixed. to achieve a slurry with a low water-to-binder ratio. Compared to common mortar mixers on the market, grout mixers and storage machines for sale are characterized by faster pulping and more uniform pulp mixing. It is one of the important pieces of equipment in the big pulping station.

Grout mixer and storage machine for sale is primarily used for mixing and preparing grout and other similar slurries that require intensive pre-mixing. Grout mixer and storage machine for sale used in pressure grouting works such as railway and highway construction, mining, hydropower engineering, insulation and waterproofing, and building foundation grouting.

Advantages of grout mixer and storage machine for sale:

1.High efficiency and large reserves, suitable for various grouting engineering operations;

2.Safe and reliable; the main component motor adopts advanced protection level I.

3.The mixing arm of the storage tank adopts a pre-modified frame structure with high strength, large force, and no deformation.

4.High-speed centrifugal mixing, uniform mixing, no sedimentation;

5.High reliability; the motor is installed vertically, with convenient sealing, good sealing effect, and low failure rate. Even a small amount of slurry leakage from the stirring shaft of the motor will affect the short-term production and use I don’t. Time.

Precautions for use of grout mixer and storage machine for sale:

1.Check whether the rotation of the stirring blade is correct and ensure that the slurry pipe has no leakage;

2.Add an appropriate amount of water, turn on the device, clean and wet the tapping barrel and pipe, and drain the tapping machine water after cleaning.

3.Add a certain amount of water to the machine. (Close the main valve at the front of the hopper before starting the machine to stop adding water to the hopper, but do not turn off the main water supply which can be lowered properly. The transmission device has, needs a cooling and cleaning unit during the pulping process, otherwise, the driving components will burn) Open the pulper, follow the rules Add powder evenly in order, control the feeding time, and Continue stirring for 3-5 minutes after the powder is added;

4. Transport the prepared slurry to slurry storage tanks to maintain dynamic slurry storage.

5. Immediately after pulping is completed, clean the equipment and pipelines, open the pulper, and circulate the remaining cement slurry through the pulper and pipelines.

If you are interested in grout mixer and storage machine for sale, please contact us! Email: sales@wodetec.com! We can also provide customized service.