High speed cement grout mixer and storage machine

Wodetec is a professional manufacturer of grouting equipment. Our machinery mainly includes grout pumps, grout pump stations, slurry machines and other related products. We have our own independent technical research and development team and production base. Wodetec always adheres to the concept of putting products first and meeting customer needs, and strives to provide customers with the most satisfactory service. High speed cement grout mixer and storage machine are 500L, 750L, 1000L, etc. High speed cement grout mixer and storage machine with a capacity of 1000 liters is widely welcomed by customers. High speed cement grout mixer and storage machine is a high shear and high speed mixer with a mixing time of only about 2-3 minutes. Some other suppliers require approximately 5 minutes or more.

High speed cement grout mixer and storage machine pour water, cement, bentonite and other materials into the mixer, the mixer blades mix these materials evenly and store them in the agitator. After that, you can get a well-stirred solution. High speed cement grout mixer and storage machine usually used in hydraulic, railway, highway, construction, mining, and other industries. High speed cement grout mixer and storage machine has the features of high pulp efficiency, easy operation, uniform slurry and short distance transportation.

When using the cement grout mixer and storage machine , the following points should be noted:

1. When using this machine, please make sure that the moving parts are not blocked and the connections are fixed before turning on the power. during operation. Also pay attention to the presence of other abnormal phenomena
2. Regularly check gearbox components and add 3## li base grease.
3. Check the valve body for wear. If the valve body is severely worn, deformed, or rusted (if the rust is severe and cannot be disassembled, disassemble the valve body, wipe it with a clean file, and apply butter to reduce wear), if the seal is seriously affected should be replaced in time.
4. Avoid running the pump dry for long periods of time and keep large hard particles and easy-to-wrap tape out of the circulation pump.
5. Periodically check whether there is no mud leakage in the gearbox assembly of the agitator or the discharged coolant is very turbid, and replace the parts in a timely manner according to the degree of wear.
6. When cleaning the equipment, the valves at the bottom of the pulp bucket and the bottom of the circulation pump should be opened to completely drain the remaining mud and avoid caking. This affects the efficiency of the device.

More details about the cement grout mixer and storage machine, please contact us!