Hydraulic grout mixer machine for cement mixing

Hydraulic grout mixer machine for cement mixing is independently researched and developed by our company. After many field use and continuous improvement, grout mixer  machine for cement mixing is a special equipment for slurry preparation. Singapore cement grout mixers are mainly used in engineering construction for hydropower, railway, transportation, construction, mining and other industries. Mix cement, bentonite, etc. with water and its additives to quickly form a slurry. The machine uses high speed impellers and vortices to create a slurry. It features high speed slurrying and uniform slurry mixing compared to normal low speed blade mixers.

Hydraulic grout mixer machine for cement mixing is mainly used for mixing and preparing cement slurries and other similar slurries that need to be strongly mixed beforehand. Used in grouting machines for railway and road construction, mining, water and electricity. Pressure grouting for construction, insulation, waterproofing, and pouring construction foundations.

Hydraulic grout mixer machine for cement mixing is a special equipment for quick preparation of grout in grout engineering. The cement grout mixer for Singapore not only produces high efficiency pulp, but also has constant pulp-feeding capacity. The rotation of the impeller of the high-speed centrifugal pump generates a high-speed liquid flow, forming a strong vortex in the slurry production body, so that the material is sufficiently and uniformly stirred, and the slurry can be quickly turned into slurry. increase. Mainly used to provide grout for grouting water conservancy, railway, highway, bridge, building, mine and underground project construction.

When using grout mixer machine for cement mixing, you should pay attention to the following points:

1. Make sure the mixing impeller is rotating correctly and make sure there are no leaks in the slurry pipe.
2. Add proper amount of water and turn on the equipment to clean and moisten the pulp barrel and pipeline. Drain the pulp machine water after washing.
3. Add more than 80Kg of water, turn on the pulp machine, add the powder materials evenly in the specified order, control the feeding time within 5-6 minutes, after adding all the powder materials, Continue stirring for 3-5 minutes. minutes;
4. Transport the prepared slurry to slurry storage tanks to maintain dynamic slurry storage.
5. After connecting the slurry press pipeline to the slurry storage bucket, or directly transport the slurry machine to the hopper of the slurry press and start squeezing.
6. As soon as the pressing is complete, clean the equipment and pipeline and turn on the pulping machine so that any remaining cement slurry in the pulping machine and pipeline can be circulated and removed.

If you are interested in the hydraulic grout mixer machine for cement mixing, welcome to contact us!