500kg castable refractory mobile pan mixer
500 liters dry forced action mobile refractory pan mixer is a new-generation mixer developed by our factory based on years of practical experience. It is a mixer used to mix dry and semi-dry materials: wet materials or colloidal materials, such as refractory materials, plastic concrete, mortar, slag, coatings, castables, silicate products, etc. The equipment can also be equipped with a bucket-type mixer. The hoist saves labor and is easy to operate.
Brief introduction of 500kg castable refractory mobile pan mixer operation:
After the 500kg castable refractory mobile pan mixer is energized, the main motor for stirring is started through the start (stop) switch on the power distribution cabinet with the protection function. The object is added to the mixing tray of the mixer. At the same time, the materials that need to be added to water can be controlled by adding water to the power distribution cabinet. Add a certain amount of water to the mixing tray by adding a water pump, and stir together. After the materials are evenly mixed, beat.
Open the material port, enter the storage device through the discharge chute or install a conveying device to transport it to the position you need. After all the materials in the mixer are drained, close the material door to complete a mixing cycle. A certain gap should be maintained between all scrapers and linings during work. The water supply adopts a phase submersible pump, and the water supply is timed. After the water supply time is completed, the power is automatically cut off and the water supply is stopped. The whole process of adding water is simple and easy to operate.