dry-mix spray refractory gunite shotcrete machine sales

The refractory shotcrete machine for sale is first-class in design, exquisite in manufacture, defect-free, and durable. The refractory shotcrete machine for sale adopts a U-shaped material cavity, which has good sealing performance and is mainly used for repairing industrial furnaces.

Traditionally, the installation of refractory materials is a labor-intensive and time-consuming process, which usually involves manual application methods, such as casting or manual ramming. However, with the development of technology, the Refractory Construction Gunning Machine appeared in the refractory industry. Fire-resistant gunning machine, also known as fire-resistant shotcrete machine, is a special equipment for spraying fire-resistant materials efficiently and accurately. The working principle of the machine is to mix the refractory with water, and then pump it to the nozzle through the hose, where the refractory is pushed to the surface to be lined at high speed.

Good quality dry refractory concrete equipment can be used for construction inside and outside walls, water mud sand coating and outside walls thermal insulation material sand scaffolding, refractory material coating.

The gunning machine for refractory castable is mainly composed of a hopper, stirring device, discharge elbow, air system, rotor, reducer, and other parts.

The high quality refractory shotcrete plaster machine driving device is composed of a motor and a reducer. The shaft end of the motor is linked to the drive gear shaft, and after being decelerated by the reducer, the rotor mounted on the output shaft is driven to rotate. After the transmission gear is decelerated by the reducer, it drives the rotor installed on the output shaft to rotate.

Wode Equipment as refractory gunning machine manufacturer has developed two different output castable gunning machine, WZ-3ER (3m3/h) and WZ-5ER (5m3/h). Every model refractory gunning machine, all been equipped with an ABB frequency converter, high-pressure water pump, and new type pre-dampening nozzle. ABB frequence converter could adjust the motor speed and control the output, on the other hand, could avoid clogging the hose due to excessive output when starting. High pressure water pump could provide high pressure water for gunning machine, when going through the water ring hole atomization, could make water and refractory castable materials fully mixed with refractory pre-wet. In the new type pre-dampening nozzle, there are two needle valves to control two water lines. The operator could adjust the needle valve to precise control of water amount, if so, greatly reduces operator proficiency requirements.

The shotcrete machine used for spraying refractory materials uses compressed air to spray a proportion of refractory material at high speed to form a refractory layer on the surface of the sprayed masonry. The shotcrete machine used for spraying refractory materials is widely used and is mainly applied to heat guns in the refractory layer of industrial furnaces.

Factory direct sale refractory dry shotcrete spraying machine with air compressor in Qatar uses compressed air to spray a certain percentage of refractory material at high speed to form a refractory layer on the surface of the sprayed masonry. Due to its fast, efficient, and high engineering quality, the refractory dry shotcrete spraying machine is mainly suitable for concrete spraying, such as tunnels, culverts, subways, hydropower projects, underground projects, mining roads, highway slope protection, etc.

Latest Technology refractory gunite concrete spray machine can be applied to spraying work in flammable and explosive dangerous environments such as underground coal mines, metal mines, tunnels, subways, and high-marsh high-dust mines.

The dry mix spray refractory gunite shotcrete machine uses compressed air to transport refractory materials or similar loose materials through pipelines, control the mixing of water at the end door, and then spray them on the sprayed surface at high speed to condense and harden, thereby forming a material protection layer with a certain strength.

The refractory castable gunite machine applied in steel plant has develop two different output castable gunning machine, WZ-3ER (3m3/h) and WZ-5ER (5m3/h).For every model refractory gunning machine, all been equipped with ABB frequency converter, high pressure water pump, new type pre-dampenning nozzle.

Castable refractory gunite machine for soil nailing is a refractory layer formed by using compressed air to spray a specific percentage of refractory onto the surface of a material to be sprayed at high speed. Castable refractory gunite machine for soil nailing is mainly used to support the construction of concrete sprays and tunnels, culverts, subways, hydropower projects, underground projects, mining roads, slope protection of highways, etc. Hot spray refractories for industrial furnaces are also used.

The refractory coating machine for refractory material is equipped with ABB frequency inverter, and could achieve variable output from 1m3/h to 3m3/h. Compared with the common dry mix shotcrete machine, refractory dry mix gunning machine is also provided new type pre-dampening nozzle assy, it is equivalent to a pre-wet system,

The castable gunning machine for sale adopts a straight-through rotor-type non-adhesive material cavity, which can discharge the material smoothly and save time.

The working principle of the dry spraying refractory shotcrete machine is to put the refractory material into the vibrating hopper, pass through the screen and enter the straight-through material chamber of the rotor, and rotate with the rotor to the discharge port, where it is blown into the rotary by the compressed air from the upper wind path. Then the cyclone introduces another stream of compressed air, which blows and accelerates the material in a multi-head spiral state, and makes it rotate and float, enters the delivery pipe, and mixes with water to spray the sprayed surface when it reaches the nozzle.

The gunning machine for refractory price Liverpool is specially designed for the spraying and pouring of refractory materials in steel mills. Unlike conventional dry shotcrete machines, it features ABB frequency converters, new pre-dump nozzle assemblies, and a high-pressure water pump for refractory nailers.

Wode Equipment as castable gunning machine for refractory price has developed two different output castable gunning machine, WZ-3ER (3m3/h) and WZ-5ER (5m3/h). Every model refractory gunning machine, all been equipped with an ABB frequency converter, high-pressure water pump, and new type pre-dampening nozzle. ABB frequence converter could adjust the motor speed and control the output, on the other hand, could avoid clogging the hose due to excessive output when starting. High pressure water pump could provide high pressure water for gunning machine, when going through the water ring hole atomization, could make water and refractory castable materials fully mixed with refractory pre-wet. In the new type pre-dampening nozzle, there are two needle valves to control two water lines. The operator could adjust the needle valve to precise control of water amount, if so, greatly reduces operator proficiency requirements.

The large working capacity shotcrete spray refractory gunite machine for sale has the functions of stirring, conveying, and spraying. Refractory mixers are widely used in gunning metallurgy and industrial furnaces and are widely used in steel mills, etc.

Supplier customized refractory spraying gunite machine is a new type of repair tool for the industrial furnace wall jointly developed with the more advanced gunning furnace wall thermal repair technology on the market today. Supplier customized refractory spraying gunite machine is the most advanced cold and hot repair equipment in the same industry today.

The gunning machine for refractory price adopts the principle of forced feeding pneumatic conveying: the gunning material enters the pressure vessel through the silo and the feeding valve, and after closing the feeding valve, the gunning material in the gunning machine is sent to the spray gun by compressed air, evenly mixed with water and sprayed to the working surface.