factory price dosing peristaltic hose pump

During the process of Mining Dosing Peristaltic Squeeze Hose Pumps industrial production, the transportation medium is 70% or more.

High efficiency and high yield cement peristaltic hose pump are also known as peristaltic pumps, which consist primarily of pump houses, rotors, rollers, idle rollers, squeeze tubes, and drive units. The squeeze hose of the pump house is U-shaped, and the hose deforms when the rotor drive rotates the roll. After the rollers rotate, the deformed hose recovers due to its elasticity. Therefore, a negative pressure is generated on this hose, which sucks the slurry and drains it from the outlet under the indentation of the roller, eventually forming the pressure transfer of the slurry.

After the peristaltic hose pump for foam concrete is used, if it is not used for a long time, pay attention to cleaning up the sundries in the peristaltic hose pump for foam concrete in time to prevent solidification and agglomeration, which will cause unsmooth material delivery and blockage when it is used again.

High pressure good grade industrial peristaltic pump has a good self-priming ability, and can almost generate a perfect vacuum to absorb liquid: conveying gas-containing liquid and foam liquid without air resistance; conveying high-viscosity, shear-sensitive media is also a strong point; fixed discharge per revolution.

Industrial squeeze hose peristaltic pump for foam cement features determines that the squeeze hose peristaltic pump can solve many problems that ordinary pumps cannot solve. When you encounter transportation problems that cannot be solved by ordinary pumps, you can consider whether the industrial hose pump can meet your requirements.

High efficiency and high yield cement peristaltic pumps usually consist of pump hoses, rotors, rollers, idle rollers, squeeze hoses, drive units, and so on. In the pump house, the squeeze hose is U-shaped, and the hose deforms when the rotor rotates the rollers. After the rollers rotate, the deformed hose recovers due to its elasticity. Therefore, negative pressure creates this hose, sucks the slurry, drains it from the outlet under the push of the roller, and finally forms the pressure transfer of the slurry.

Wear-resisting Transfer Peristaltic Pump adopts a geared motor with excellent function as the power source, which provides strong power for the smooth and quiet operation of the hose pump.

Industrial Corrosive Liquid Peristaltic Pumps should always pay attention to the integrity of the hose. Generally, it is better to run at a medium speed. When the hose is found to be aging, the hose should be replaced in time.

The adjustable flow rate viscosity peristaltic pump is a special pump that does not need any mechanical seal. It uses the motor to drive the pressure roller on the rotor to alternately squeeze the special hose installed in the pump chamber, and form a vacuum through the compression and rebound of the hose, thereby To achieve the purpose of suction and conveying materials, the conveyed materials only contact with the inner wall of the hose.

Miniature peristaltic pump for OEM applications, also known as hose pump or tube pump, has become a reliable and universal pumping solution in many industries. Their unique working principle based on peristalsis provides several advantages over traditional pump technology. From pharmacy to food and beverage, from wastewater treatment to agriculture, the application of peristaltic pump has been expanding, which has completely changed all industries with its efficiency, accuracy and reliability.

Factory Directly Sell dosing pump for chemical liquid is different from the operation mode of the shaft seal of the traditional impeller and has a completely different principle and application range for the medium transportation of high viscosity, high corrosion, and large fluid impurities from the traditional delivery pump.

Widely used high-efficiency peristaltic Industrial hose pump clamps the wheel and squeezes the elastic pump tube to seal the pump tube. At the same time, when the runner moves forward, a large negative pressure will be generated at the rear end of the pump tube.

When we replace the hose of the industry hose pump peristaltic concrete pumps, first loosen the clamp bolts at both ends, and remove the clamp, then loosen the eyebolt at one end, pull out the short tube at one end from the hose, and move The motor pushes the rubber hose out of the pump, then inserts a new hose from the end of the removed short tube between the pump casing and the pressure roller, starts the motor, puts the hose in, fixes the suspension ring, and installs the hose clip , so far the replacement task is completed.

Industrial hose pump peristaltic pump with hydraulic motor is a “pillow” shaped fluid formed by a section of pump tubing between two rotating rollers

The high performance of the Wear-resistant rubber hose pump sales is also reflected in its high sensitivity, which is mainly manifested in the delivery of high viscosity and uniformity, while the shear, for the delivery of gas or liquid, is invariable and non-deteriorating. For high-density liquids or gases, this feature set is a non-negligible advantage.

The factory price peristaltic hose pump does not need to replace seals, gaskets, impeller rotors, stators, or various traditional internal pump components; the pump movement is divided into the clockwise rotation without backflow and siphon phenomenon, and has a shut-off valve function.

Peristaltic sludge pump series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. It has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

High Quality Wear Resisting Industrial Peristaltic Hose pump has no leakage and pollution, adopts advanced rolling technology, the pressure roller does not need any lubrication, has a strong self-priming ability, and has the self-cleaning ability, can suction material in positive and negative directions, low power consumption, high volumetric efficiency, and long service life, The advantages of high lift and high pressure at the pump port.

Industrial peristaltic pumps for high viscosity unique advantages of hose pumps make them more and more widely used in gold smelting, non-ferrous smelting, chemical industry, mining, food processing, brewing, ceramics, water treatment, and other industries.

The cheap customized 220v peristaltic pump has a complete structure and does not use seals, so there will be no leakage, and there is no leakage self-priming pump in the case of high on-site management requirements.