Factory supply large flow peristaltic hose squeeze pump

High efficiency and high yield cement peristaltic hose pump are also known as peristaltic pumps, which consist primarily of pump houses, rotors, rollers, idle rollers, squeeze tubes, and drive units. The squeeze hose of the pump house is U-shaped, and the hose deforms when the rotor drive rotates the roll. After the rollers rotate, the deformed hose recovers due to its elasticity. Therefore, a negative pressure is generated on this hose, which sucks the slurry and drains it from the outlet under the indentation of the roller, eventually forming the pressure transfer of the slurry.

When the high efficiency widely used concrete peristaltic Industrial Hose Pump is subjected to pumping, the hose is successively squeezed by the compression shoes mounted on the rotating wheel. By squeezing the hose wall, the first shoe creates a vacuum and draws the pumped liquid into the hose.
Once the pumped liquid enters the hose, the second roller presses through the hose and pushes the liquid towards the pump outlet.
When the discharge side shoe is separated from the hose, the opposite shoe is already in compression, preventing any backflow. The pumped fluid is then successfully sucked in and pushed out due to the rotational action of the impeller.

The high flow rate customized peristaltic pumps are positive displacement pumps based on the principle of alternate compression of hoses, similar to how the human larynx or intestines work.

Peristaltic sludge pump series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. It has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

The manufacturers direct price concessions industrial hose pump for sale has the self-priming ability, but it is not recommended to use a self-priming device, because: during the self-priming process, there is no liquid in the pump, which will cause dry grinding. Generally, it is allowed within 15 seconds, and the pump will be damaged after it is exceeded.

The adjustable flow rate viscosity peristaltic pump is a special pump that does not need any mechanical seal. It uses the motor to drive the pressure roller on the rotor to alternately squeeze the special hose installed in the pump chamber, and form a vacuum through the compression and rebound of the hose, thereby To achieve the purpose of suction and conveying materials, the conveyed materials only contact with the inner wall of the hose.

When we replace the hose of the industry hose pump peristaltic concrete pumps, first loosen the clamp bolts at both ends, and remove the clamp, then loosen the eyebolt at one end, pull out the short tube at one end from the hose, and move The motor pushes the rubber hose out of the pump, then inserts a new hose from the end of the removed short tube between the pump casing and the pressure roller, starts the motor, puts the hose in, fixes the suspension ring, and installs the hose clip , so far the replacement task is completed.

Concrete soft rubber pump extrusion pump direct sales are a newly designed multi-functional industrial delivery pump with the features of no sealing, no leakage, strong self-suction capacity, compact structure, easy operation, and maintenance.

The oil drilling project squeeze hose peristaltic pump feature a spring-loaded mechanism to ensure smooth pump operation. This feature is also important for shear-sensitive fluids such as living cells. Another aspect to consider is adjusting the pump’s different tube sizes to the desired flow rate.

Peristaltic hose Pumps for Concrete with strong self-priming ability are very important for large industries as there are no blocking bubbles or resistances that affect the transfer rate for the transfer of liquids and gases as they can create a vacuum environment in their own right. transmission.

Slurry hose pump can transport medium: strong abrasive medium, high specific gravity medium, corrosive medium, high solid content medium, shear sensitive medium, metering application, high viscosity medium, high maintenance cost application, long fiber medium, self-priming occasion and crystalline medium.

There is no hose for a peristaltic hose pump for transfer that can withstand all media. Therefore, it is necessary to confirm the type of medium, compare it with the chemical compatibility table or make sure that the pump tube can be used through the immersion test.

When the peristaltic hose pump for pumping sludge and mining slurry is used for about 200 hours, the hose can be rotated 90 degrees. In addition to the rotation direction of the single-tube hose pump, the hose can be switched back and forth to change the pressure point of the hose and prolong its service life of the hose.

The life of a China peristaltic pump for foam concrete is 7-10 years. The challenge lies in the hose of the hose pump, which is the core component of the hose pump, and its life is directly related to the cost of the pump.

Heavy duty hose peristaltic pumps for concrete play a central role in various fields and have been used in the industrial field for many years and have a long history. Hose pumps serve primarily industrial transport functions and are named after the transmission of gases, liquids, and solids.

Wode Equipment Co., Ltd. is a leading Peristaltic Hose Pumps for Water and Wastewater Treatment manufacturer in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China.
Many customers choose our Peristaltic Hose Pumps for Water and Wastewater Treatment. Our industrial hose pump has been exported to the South Africa, USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain and Nepal. The export amount is up to USD2000, 000.00. We’ve been an industrial hose pump manufacturer for more than ten years. To choose reliable supplier, contact us now!

High Viscosity Peristaltic Pump for Cement Concrete rarely leak. High Viscosity Peristaltic Pump for Cement Concrete path of the hose pump is straight and free of obstructions.

Compact and Easy-to-Use Peristaltic Hose Pump operate on a unique mechanism that involves compressing and relaxing a flexible hose to create a pumping action. The pump rotor, fitted with rollers or slippers, presses the hose against the pump casing, creating a positive displacement effect. As the rotor rotates, the compression section moves along the hose, pushing the fluid forward. Once the pressure is released, the hose returns to its original shape, creating a vacuum that draws in more liquid. This peristalsis ensures a constant flow rate and prevents any backflow.

In the process of using the food grade rubber hose for industrial peristaltic pumps, the amount of the hose is small. A straightforward, pumped-down obstacle.

When replacing the hose of an Industrial peristaltic pump with long service life, first loosen the pipe clamp bolts at both ends, remove the pipe clamp, then loosen the lifting ring bolt at one end, pull out one end of the short pipe from the hose, and press