Good quality reasonable price industry peristaltic hose pump

Industrial hose pump for oilbase mud is equipment for grouting in mine shafts, railway roads, hydropower projects, rock and soil slopes, underground projects, subways, and municipal construction, as well as blast furnace gunning in steel and chemical industries and building wall spraying.

Self Priming Peristaltic Pump for Sludge series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. Self Priming Peristaltic Pump for Sludge has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

Clean the pump head in time after using the Large Volume for Concrete Hose Peristaltic Pump. If it is not used for a long time, please remove the hose to extend its service life. Hoses are vulnerable items.

The unique non-sealed structure of the hose concrete delivery peristaltic pump has no leakage and pollution; the advanced rolling technology is adopted, and the pressure roller does not need any lubrication; the self-priming ability and self-cleaning ability are strong, and the material can be sucked forward and backward.

Large flow industrial peristaltic hose pump completely gets rid of the operation mode of the traditional pump impeller and shaft seal and has greater advantages for medium transportation with high viscosity, high corrosion, and large fluid impurities.

High-Pressure Mining Clay Mud peristaltic Pump For Sale has a good self-priming ability, which is unmatched by other pumps.

High quality industrial wear-resisting peristaltic pump is a new multifunctional multipurpose industrial pump developed by absorbing the advanced technology of foreign countries.

When replacing the hose of an Industrial peristaltic pump with long service life, first loosen the pipe clamp bolts at both ends, remove the pipe clamp, then loosen the lifting ring bolt at one end, pull out one end of the short pipe from the hose, and press

Gear Type Foam Concrete Peristaltic Hose Pump has a low failure rate, is simple, and is durable. Because the Concrete Peristaltic Hose Pump body and operating parts are not in contact with the conveying medium, this type of pump overcomes the shortcomings of PN pump parts that wear too quickly.

The principle of the industrial peristaltic concrete tube pump for pumping sludge and mining slurry is the same as the principle of the peristaltic pump. The runner squeezes the industrial peristaltic concrete tube pump tube and rotates to push the fluid in the tube forward, creating a fluid flow similar to squeezing with two fingers.

Industrial hose pump peristaltic pump with hydraulic motor is a “pillow” shaped fluid formed by a section of pump tubing between two rotating rollers

Industrial extrusion hose pump cement sales can meet the requirements of large flow, high temperature, high pressure, high viscosity, strong corrosion, low shear, solid impurities, and abrasive fluid transportation. It subverts the way traditional machinery works. On the basis of fully absorbing the advantages of advanced products at home and abroad, the products have been improved, designed, and manufactured.

Peristaltic hose pump for cement and foam concrete has strong self-priming ability and self-arranging ability, and can suck materials in both positive and negative directions; simple hose device, simple installation engineering repair, low repair cost, and easy operation.

In recent years, the development and application of various new materials is an important factor driving the development of industrial hose pump technology. A variety of new materials are used in the parts of the hose pump, and the benefits are mainly to extend the service life and reliability of the hose pump in corrosive media and to expand the scope of use of the industrial hose pump for conveying mud and cement.

High-quality precise dosing peristaltic pump’s unique feature is that no other pump has better self-priming capabilities than a hose pump that can create a perfect vacuum to absorb liquids. Transports gases and foam liquids without gas resistance. Another advantage is the transport of highly viscous and shear-sensitive media. Each fixed displacement is a natural metering pump independent of outlet pressure.

The characteristics of the high quality wholesale peristaltic pumps are as follows:
a) Since there are no sealing parts such as mechanical seals and gland packings, there is no need to worry about the leakage of the sealing part.
b) Since there is no sealing part, it can run dry and be used as a vacuum pump.
c) Because the fluid only passes through the special rubber tube, the impeller, rotor, cylinder, and other moving parts do not touch the liquid and do not stir and foam, so it can be directly transported in the original state.
d) It can be delivered regardless of the direction of discharge or suction. Therefore, the residual fluid in the discharge pipe can be easily discharged by reversing.
e) The parts in contact with the liquid are only rubber, which has good wear resistance and low-speed operation, so it is suitable for the transportation of slurry.

Enter the Peristaltic Dosing Pump for Ceramic Slurry Liquid – a versatile and reliable solution for pumping challenging fluids like clay slurries. Unlike conventional pumps that rely on rotating parts to move fluids, peristaltic pumps operate on a completely different principle. The pump’s mechanism involves a flexible tube or hose that is squeezed by rollers or shoes, creating a series of occlusions that push the fluid through the tubing in a pulsating manner. This unique design offers several advantages when it comes to pumping clay slurries.

The peristaltic pump for Nigeria mining industry is simple in structure and easy to manufacture. The durability of the pump is mainly determined by the elasticity and corrosion resistance of the tube, and its flow rate is related to the speed of the motor and the inner diameter of the tube. Therefore, the key lies in the selection of the tube and the speed control mechanism. As long as the tube has a long enough life, the speed is stable, and in the long term, there is no problem with maintaining metered delivery.

The high flow rate hose squeezes peristaltic pump has no seals, ball valves, diaphragms, gaskets, submerged rotors, stators and pistons that could cause leakage, clogging, and corrosion in the hose pump. The high flow rate hose squeezes peristaltic pump transfer abrasive slurries, corrosive acids, and gaseous fluids as easily as water. The high flow rate hose squeezes peristaltic pump does not need auxiliary equipment when it works: no check valve, sealing water flushing system, and dry running protection can be carried out.

Wode Equipment Co., Ltd. is a leading hose peristaltic pump manufacturer in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China.
Many customers choose our peristaltic pump for wastewater. Our industrial hose pump has been exported to the South Africa, USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain and Nepal. The export amount is up to USD2000, 000.00. We’ve been an industrial hose pump manufacturer for more than ten years. To choose reliable supplier, contact us now!