Good Quality Refractory Concrete Mixing Shotcrete Machine

Refractory spraying gunite machine for blast furnace is mainly used for thermal spraying of the refractory layer of industrial furnaces. It is mainly suitable for concrete spraying and supporting the construction of medium coal tunnels, culverts, subways, hydropower projects, underground projects, mine roadways, highway slope protection, etc. and the thermal gunning operation of the refractory layer of the industrial furnace.

Dry mix spraying refractory shotcrete gunning castable machine price is equipped with an ABB frequency inverter and can achieve variable output from 1m3 / h to 3m3 / h. Compared to typical dry mix shot cleat machines, refractory dry mix gunning machines also feature a new type of pre-dumping nozzle assembly.

The shotcrete spray refractory gunite machine for sale head adopts one-stage compression, which has a longer service life and higher efficiency. The frequency converter adjusts the speed of the permanent magnet motor according to the actual air consumption to meet the air demand from time to time, and intelligently controls the power consumption.

Variable Output dry mix refractory spray shotcrete machine is small in size, easy to carry on-site, the cost of accessories is low, and the maintenance is simple. Variable Output dry mix refractory spray shotcrete machine is easy to use, fast, saves materials, saves labor, and saves money.

Widely used swimming pools concrete refractory spray shotcrete machine has been widely praised by customers and is mainly used in mine shafts, hydropower projects, railway, and highway tunnels, subway projects, bridge maintenance, slope support, civil air defense projects, municipal construction projects, environmental greening projects, etc. With its excellent performance, refractory shotcrete equipment is sold all over the world.

Wheel Electric dry refractory gunning machine is suitable for indoor and outdoor wall spraying, cement mortar grouting, bridge grouting and waterproof surface spraying, fireproof spraying, thermal insulation material spraying, ceiling spraying, wall spraying, paint spraying, garden spraying, relief effect paint spraying, handicraft spraying, rockery Spraying, sound-absorbing material spraying, waterproof plugging, waterproof leak repair, light and convenient for construction under bridges, dams, hillsides, basements, tunnels, and house factories.

Castable refractory gunite machine for soil nailing is a refractory layer formed by using compressed air to spray a specific percentage of refractory onto the surface of a material to be sprayed at high speed. Castable refractory gunite machine for soil nailing is mainly used to support the construction of concrete sprays and tunnels, culverts, subways, hydropower projects, underground projects, mining roads, slope protection of highways, etc. Hot spray refractories for industrial furnaces are also used.

Most of the refractory dry shotcrete machines operate in relatively harsh environments and the operating site often changes due to changes in geological conditions, so its performance is affected by the temperature, humidity, and geological conditions of the operating site.

Large flow refractory concrete shotcrete machine uses air pressure to convey dry material from the machine through the hose to the nozzle where water is added. Large flow refractory concrete shotcrete machine is a low to high production, continuous-feed material placement unit for dry-mix gunite or refractory materials.

Castable refractory guniting shotcrete machine for soil nailing is exported to Thailand, Malaysia, India, Indonesia, UK, Oman, etc., and has high spray effect and is highly evaluated by customers.
The refractory guniting shotcrete machine for soil nailing is different from the sealing plates of regular drywall concrete machines.

Wode Equipment as refractory gunning machine for sale supplier has developed two different output castable gunning machine, WZ-3ER (3m3/h) and WZ-5ER (5m3/h). Every model refractory gunning machine, all been equipped with an ABB frequency converter, high-pressure water pump, and new type pre-dampening nozzle. ABB frequence converter could adjust the motor speed and control the output, on the other hand, could avoid clogging the hose due to excessive output when starting. High pressure water pump could provide high pressure water for gunning machine, when going through the water ring hole atomization, could make water and refractory castable materials fully mixed with refractory pre-wet. In the new type pre-dampening nozzle, there are two needle valves to control two water lines. The operator could adjust the needle valve to precise control of water amount, if so, greatly reduces operator proficiency requirements.

The refractory gunite concrete spraying machine Philippines is mainly used for refractory gunning materials and spray coatings in thermal equipment in steel plants.

OEM factory refractory concrete gunning machines can be widely used in mines, tunnels, culverts, subways, slope support, hydropower projects, underground projects, and coal mine high gas mine roadway shotcrete construction operations.

After the wholesale price explosion proof refractory shotcrete spray gunite machine works for a period of time, there will inevitably be a kind of friction on the rubber plate, steel lining plate and other parts, forming a gap. At this time, manual adjustment is required to return to the original position.

The brand new concrete gunite machine refractory gunite shotcrete has good mechanical properties, no noise, high construction efficiency, low cost of accessories, simple maintenance, time-saving, labor-saving, high efficiency, and labor-saving.

The details of the refractory dry shotcrete machine equipment are well handled, the supporting facilities are complete, the overall structure is very firm, it is very convenient to use, and the cost performance is very high.

As a supplier of Refractory spraying machine in coal mine, Wodetec Equipment has developed two different output Refractory spraying machine in the coal mine, WZ-3ER (3m3 / h) and WZ-5ER (5m3 / h). All models of best quality Refractory spraying machine in coal mine are equipped with an ABB frequency converter.

Refractory Shotcrete Machine Made In China has the advantages of less failure, durability and easy operation, convenient installation, no transmission parts, no need for lubrication, economical and practical, and shortens the repairing time.

Supply Quality gunning machine for refractory is multifunctional and highly efficient machines used in the metallurgical industry for gun guns, powder spraying, and fully equipped spraying. This gunning machine for refractory was introduced from other countries and has been greatly improved in recent years.

Wode Equipment as castable gunning machine for refractory price has developed two different output castable gunning machine, WZ-3ER (3m3/h) and WZ-5ER (5m3/h). Every model refractory gunning machine, all been equipped with an ABB frequency converter, high-pressure water pump, and new type pre-dampening nozzle. ABB frequence converter could adjust the motor speed and control the output, on the other hand, could avoid clogging the hose due to excessive output when starting. High pressure water pump could provide high pressure water for gunning machine, when going through the water ring hole atomization, could make water and refractory castable materials fully mixed with refractory pre-wet. In the new type pre-dampening nozzle, there are two needle valves to control two water lines. The operator could adjust the needle valve to precise control of water amount, if so, greatly reduces operator proficiency requirements.