high abrasion peristaltic pump with silicone tubing

The flow rate accuracy error of the factory price dosing peristaltic hose pump is as low as about 1%, and the change in accuracy does not change even if the viscosity of the medium changes.

When using an industrial small peristaltic hose pump, pay attention that the pressure regulator should not be too tight. If it is too tight, the hose will be compressed and its service life will be shortened.

When the high efficiency widely used concrete peristaltic Industrial Hose Pump is subjected to pumping, the hose is successively squeezed by the compression shoes mounted on the rotating wheel. By squeezing the hose wall, the first shoe creates a vacuum and draws the pumped liquid into the hose.
Once the pumped liquid enters the hose, the second roller presses through the hose and pushes the liquid towards the pump outlet.
When the discharge side shoe is separated from the hose, the opposite shoe is already in compression, preventing any backflow. The pumped fluid is then successfully sucked in and pushed out due to the rotational action of the impeller.

The hose pump for foam cement plays an important role in the industry. The hose pump for foam cement has been used in the industry for many years and has a long history. Its industrial use is mainly for transportation functions. It belongs to the peristaltic part that transports liquids and gases.

The hose mini peristaltic pump price has well-designed leakage grooves and return grooves so that the gears can withstand minimal torque forces, reducing bearing loads and wear and improving pump efficiency.
A safety valve is also designed to prevent overloading. The full return pressure of the relief valve is higher than the rated discharge pressure of the hose mini peristaltic pump. In addition, it can be adjusted within the allowable exhaust pressure range depending on the situation. However, please note that the safety valve cannot be used as a pressure-reducing valve for a long period of time. If necessary, the pressure-reducing valve can be installed separately in the pipeline.

Large flow rate high-efficiency cement peristaltic pump unique non-sealed structure is free of any leakage and pollution; the advanced rolling technology is adopted, and the pressure roller does not need any lubrication; the self-priming ability and self-cleaning ability are strong, and can suck materials in both positive and negative directions;

The longer industrial peristaltic pumps do not have a seal structure, so there is no need to worry about medium leakage that contaminates the hose pump. The longer industrial peristaltic pump adopts advanced rolling technology so that the pressure roller can smoothly complete a series of tasks without lubrication during operation.

When the high flow peristaltic pump for sale works, the high flow peristaltic pump for sale tube is sealed by squeezing the special elastic pump tube. At the same time, the back end of the pump tube will generate negative pressure during the forward movement of the runner.

Hot sale variable speed small peristaltic pump is composed of a hose, a roller mounted on the rotor, and a pump casing. When the rotor is rotated, the inner cavity of the hose formed by the extrusion of the roller and the pump casing gradually increases from the beginning. It is in the state of absorbing liquid.

Gear Type Foam Concrete Peristaltic Hose Pump has a low failure rate, is simple, and is durable. Because the Concrete Peristaltic Hose Pump body and operating parts are not in contact with the conveying medium, this type of pump overcomes the shortcomings of PN pump parts that wear too quickly.

The industrial peristaltic pump , also known as hose pumps or tube pumps, operate with positive displacement. The rotating drum squeezes the liquid towards the pump housing, which feeds the liquid through the tubing.

High-quality extrusion hose pump is absorbing the foreign advanced technology and the development of a new, multifunction and multipurpose industrial pump. It is completely out of the running mode of the traditional pump impeller and shaft seal and impurities on the viscosity, corrosive, fluid Medium transport has a great advantage, using the principle of very different from the traditional pump, wide application range. Widely used high-efficiency concrete peristaltic Industrial hose pump for sale.

Extruded industrial hose pump for conveying cement is a peristal dynamic pump, suitable for processing aggressive, high viscosity, high density products, such as abrasive slurry, corrosive acid, gas liquid, sand / cement mortar, liquid accelerator, etc. This machine is rich in functions and has a wide range of applications, so many people are curious about his price. If you want to know, read on!

China factory manufacturer concrete industrial peristaltic hose pump advantage is that they can significantly reduce overall energy consumption during operation.

Peristaltic pump for chemical dosing and transfer, also known as hose pump or tube pump, has become a reliable and universal pumping solution in many industries. Their unique working principle based on peristalsis provides several advantages over traditional pump technology. From pharmacy to food and beverage, from wastewater treatment to agriculture, the application of peristaltic pump has been expanding, which has completely changed all industries with its efficiency, accuracy and reliability.

The high-viscosity peristaltic pump for paper-making is composed of five parts: the pump casing, the rotor body, the reducer, the base, and the hose. In the field of fluid medium transportation, especially in high-concentration and high-lift production processes, hose pumps will definitely exert their unique advantages, and at the same time bring about a revolution in the production of fluid medium transportation.

The industrial peristaltic pump price is absorbing the foreign advanced technology and the development of a new, multifunction, and multipurpose industrial pump. It is completely out of the running mode of the traditional pump.
The impeller and shaft seal and impurities on the viscosity, corrosive, fluid medium transport has a great advantage, using the principle of very different from the traditional pump, wide application range. The industrial peristaltic pump is in the form of the structure: vertical, horizontal pump. Pump into the form of the hose: single pipe pump, double pump. The pump according to the sealing form is divided into Sealed Structures.

Wear-resisting Transfer Peristaltic Pump adopts a geared motor with excellent function as the power source, which provides strong power for the smooth and quiet operation of the hose pump.

Wode is a leading Peristaltic liquid pump with rubber hose manufacturers in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China. Many customers choose our Peristaltic liquid pump with rubber hose. Our Peristaltic liquid pump with rubber hose has been exported to the South Africa, USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain and Nepal. The export amount is up to USD2000, 000.00. We’ve been a hose pump peristaltic manufacturers for more than ten years.

Industrial high-quality transfer peristaltic pump is also called the multifunctional hose pump. No mechanical seals, no jamming failures front and rear.