High-efficiency peristaltic concrete hose pump

Industrial peristaltic pump for paper marking also is more and more widely used in gold smelting, non-ferrous smelting, the chemical industry, mining, food processing, brewing, ceramics, water treatment, and other industries.

China factory price high volume peristaltic pump is easy to install, simple to operate, and can run continuously for a long time; all kinds of fibers and slurries sent in the pump are the perfect choice for shear sensitivity, abrasiveness, or gas-liquid-solid mixture; it can easily corrode the fluid in the pump, and the high viscosity Thick, high-density fluid, pasty fluid.

After the peristaltic hose pump for foam concrete is used, if it is not used for a long time, pay attention to cleaning up the sundries in the peristaltic hose pump for foam concrete in time to prevent solidification and agglomeration, which will cause unsmooth material delivery and blockage when it is used again.

The industrial peristaltic pump , also known as hose pumps or tube pumps, operate with positive displacement. The rotating drum squeezes the liquid towards the pump housing, which feeds the liquid through the tubing.

The characteristics of the high quality wholesale peristaltic pumps are as follows:
a) Since there are no sealing parts such as mechanical seals and gland packings, there is no need to worry about the leakage of the sealing part.
b) Since there is no sealing part, it can run dry and be used as a vacuum pump.
c) Because the fluid only passes through the special rubber tube, the impeller, rotor, cylinder, and other moving parts do not touch the liquid and do not stir and foam, so it can be directly transported in the original state.
d) It can be delivered regardless of the direction of discharge or suction. Therefore, the residual fluid in the discharge pipe can be easily discharged by reversing.
e) The parts in contact with the liquid are only rubber, which has good wear resistance and low-speed operation, so it is suitable for the transportation of slurry.

In recent years, the development and application of various new materials is an important factor driving the development of industrial hose pump technology. A variety of new materials are used in the parts of the hose pump, and the benefits are mainly to extend the service life and reliability of the hose pump in corrosive media and to expand the scope of use of the industrial hose pump for conveying mud and cement.

Wode is a leading high flow rate peristaltic pump manufacturers in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China. Many customers choose our hose pump peristaltic. Our high flow rate peristaltic pump has been exported to the South Africa, USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain and Nepal. The export amount is up to USD2000, 000.00. We’ve been a hose pump peristaltic manufacturers for more than ten years.

Slurry transfer peristaltic pump can transport medium: strong abrasive medium, high specific gravity medium, corrosive medium, high solid content medium, shear sensitive medium, metering application, high viscosity medium, high maintenance cost application, long fiber medium, self-priming occasion and crystalline medium.

Extruded industrial hose pump for conveying cement is a peristal dynamic pump, suitable for processing aggressive, high viscosity, high density products, such as abrasive slurry, corrosive acid, gas liquid, sand / cement mortar, liquid accelerator, etc. This machine is rich in functions and has a wide range of applications, so many people are curious about his price. If you want to know, read on!

The working principle of the peristaltic pump watson marlo is to drive (motor) to drive the rotor to move in the positive and negative circles. It is easy to install, and when the output material is too much, it is reversed to convey.

Self Priming Peristaltic Pump for Sludge series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. Self Priming Peristaltic Pump for Sludge has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

The challenge of Industrial peristaltic pump with long service life is the hose of the hose pump, which is a component of the hose pump, and its life is directly related to the cost of the pump. It can be said that the design of the hose pump is carried out around the hose life.

The hose pump for foam cement plays an important role in the industry. The hose pump for foam cement has been used in the industry for many years and has a long history. Its industrial use is mainly for transportation functions. It belongs to the peristaltic part that transports liquids and gases.

Squeeze hose quality peristaltic pumps for sale are a new type, multi-functional and multi-purpose industrial pump developed by absorbing foreign advanced technology. Squeeze hose quality peristaltic pumps for sale have completely got rid of the operation mode of the traditional pump impeller and shaft seal and have great advantages in transporting media with high viscosity, high corrosion, and large fluid impurities.

Large output peristaltic pump slurry pump is a new multi-function and multi-purpose industrial pump developed on the basis of foreign advanced technology. Breaking through the limitations of conventional pump impellers and shaft seals, it adopts a completely different mechanism from conventional pumps.

Industrial Squeeze Peristaltic hose pump for seawater is a new, multi-functional and multi-functional industrial pump. It absorbs the development of foreign advanced technology and removes the operation mode of the traditional pump impeller and shaft seal.

The cheap customized 220v peristaltic pump has a complete structure and does not use seals, so there will be no leakage, and there is no leakage self-priming pump in the case of high on-site management requirements.

Peristaltic pump for sludge series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. Peristaltic pump for sludge has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

The water and waste treatment peristaltic pump completely gets rid of the operation mode of the traditional pump impeller and shaft seal, and has great advantages for the transportation of media with high viscosity, high corrosiveness and large fluid impurities. The water and waste treatment peristaltic pump is a completely different principle from the traditional pump and has a wide range of applications.