High Quality Squeeze Industrial Hose Pump

High-pressure peristaltic pump for heavy-duty applications, also known as hose pump or tube pump, has become a reliable and universal pumping solution in many industries. Their unique working principle based on peristalsis provides several advantages over traditional pump technology. From pharmacy to food and beverage, from wastewater treatment to agriculture, the application of High-pressure peristaltic pump for heavy-duty applications has been expanding, which has completely changed all industries with its efficiency, accuracy and reliability.

Peristaltic pump for sludge series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. Peristaltic pump for sludge has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

The no-load test operation of the rubber peristaltic pump for construction industry is to check whether the rotation and fixed parts of the heat transfer oil pump unit have collision and friction, whether the bearing temperature is normal, whether the unit swing and vibration are qualified, whether various instruments are normal, each oil pipeline, joints, valves, etc. leaks, etc.

High-quality extrusion hose pump is absorbing the foreign advanced technology and the development of a new, multifunction and multipurpose industrial pump. It is completely out of the running mode of the traditional pump impeller and shaft seal and impurities on the viscosity, corrosive, fluid Medium transport has a great advantage, using the principle of very different from the traditional pump, wide application range. Widely used high-efficiency concrete peristaltic Industrial hose pump for sale.

When replacing the hose of an Industrial peristaltic pump with long service life, first loosen the pipe clamp bolts at both ends, remove the pipe clamp, then loosen the lifting ring bolt at one end, pull out one end of the short pipe from the hose, and press

A high-quality high flow industrial peristaltic pump has a service life of 7-10 years. The biggest challenge lies in the hose of the hose peristaltic pump.

The industrial hose pump large flow peristaltic chemical liquid delivery cement is an extremely popular option for pumping slurries with a solids content of up to 80%. The extensive range of chemically resistant hoses now available has resulted in peristaltic hose pump being suitable for handling many of the most demanding chemicals

The oil drilling project squeeze hose peristaltic pump pump fluid contained within flexible hoses mounted within the pump housing. Alternating compressions on the hose suck in the contents and push the product out of the pump.

As the peristaltic pump for beer brewing supplier, the peristaltic pump for beer brewing supplier is a new type of pump in the industry, which is attributed to the positive displacement peristaltic pump, and its working principle is self-priming by kneading the hose through the pressure wheel.

The customized peristaltic pump silicone tubing has a low medium flow rate and no shear force, and is especially suitable for conveying materials that are sensitive to shear force.

The oil drilling project squeeze hose pump stand out for their ease of use. Tubes or pump heads can be replaced in seconds. Designs that do not require internal valves have different advantages. Clockwise and counterclockwise operation is possible, and fluid can be delivered in both directions if the process requires it. Since there are no valves, there are fewer restrictions in the pipe, which is beneficial in situations where viscous media needs to be conveyed.

Long working life concrete hose squeeze peristaltic pump most important thing is its ability to deliver strong abrasive media. It has no valve and no seal, the only part in contact with the medium is the inner cavity of the rubber hose, and the rotor of the compressed hose is completely independent of the medium.

When the high efficiency widely used concrete peristaltic Industrial Hose Pump is subjected to pumping, the hose is successively squeezed by the compression shoes mounted on the rotating wheel. By squeezing the hose wall, the first shoe creates a vacuum and draws the pumped liquid into the hose.
Once the pumped liquid enters the hose, the second roller presses through the hose and pushes the liquid towards the pump outlet.
When the discharge side shoe is separated from the hose, the opposite shoe is already in compression, preventing any backflow. The pumped fluid is then successfully sucked in and pushed out due to the rotational action of the impeller.

The characteristics of the high quality wholesale peristaltic pumps are as follows:
a) Since there are no sealing parts such as mechanical seals and gland packings, there is no need to worry about the leakage of the sealing part.
b) Since there is no sealing part, it can run dry and be used as a vacuum pump.
c) Because the fluid only passes through the special rubber tube, the impeller, rotor, cylinder, and other moving parts do not touch the liquid and do not stir and foam, so it can be directly transported in the original state.
d) It can be delivered regardless of the direction of discharge or suction. Therefore, the residual fluid in the discharge pipe can be easily discharged by reversing.
e) The parts in contact with the liquid are only rubber, which has good wear resistance and low-speed operation, so it is suitable for the transportation of slurry.

The small peristaltic pump for waste water is a new, multi-functional and multi-purpose industrial pump developed by absorbing foreign advanced technology. The small peristaltic pump for waste water completely gets rid of the operation mode of traditional pump impeller and shaft seal, and has great advantages for medium transportation with high viscosity, high corrosiveness and large fluid impurities.

The oil drilling project squeeze hose pump wears very little when pumping these substances, unlike other rotor pumps or vane pumps, and the core part of the hose pump – the life of the hose has nothing to do with the abrasiveness of the medium.

The adjustable flow rate peristaltic pump work by squeezing the hose through rollers or sliders. Hose pumps can run dry, self-priming, and handle high viscosity, high abrasive media.

High specification squeeze hose peristaltic concrete pump does not require continuous delivery of the pumped liquid to the pump and can run dry without costly downtime or maintenance. The recovery action of the hose or pipe creates a powerful self-priming action that allows the pump to deliver liquids containing buoyancy or waste gas.

When using an industrial small peristaltic hose pump, pay attention that the pressure regulator should not be too tight. If it is too tight, the hose will be compressed and its service life will be shortened.