high shear colloidal grout mixer agitator machine

The high-volume cement grout mixing machine has high reliability; the motor is installed vertically, which is easy to seal, has a good sealing effect, and has a low failure rate. If a small amount of slurry leakage occurs at the stirring shaft of the motor, it will not affect production and use in a short period of time.

The cement slurry mixing barrel and storage barrel for foundation grouting project is mainly used to mix and prepare cement slurry and other similar slurries that need to be mixed in advance.The cement slurry mixing barrel and storage barrel are used with grouting machine for pressure grouting construction of railway and highway construction, mining, hydropower engineering, thermal insulation and waterproofing, and building foundation pouring.

Factory directly sale cement grouting mixer is used to mix and prepare similar slurries that need to be mixed in advance, such as cement slurries, and is used in conjunction with grouting machines for pressure grouting in railway and highway construction, mining, hydropower engineering, thermal insulation and waterproofing, and building foundation pouring.

Compact grouting mixer suitable for all kinds of grouting projects is mainly used in the engineering construction of railway and highway tunnels, water conservancy and hydropower, subway tunnels, mine roadways, military facilities, and various underground buildings, and emergency rescue.

The hydraulic cement grout mixer machine is a special equipment for slurry preparation. The hydraulic cement grout mixer machine mixes cement, bentonite, etc. with water and its additives to quickly make a slurry.

Well sealing effect bentonite mixer machine is the special equipment for slurry preparation. It is mainly used for projects in hydropower, railway, transportation, construction, mining, and other industries. During construction, cement, bentonite, etc. are mixed with water and its additives and quickly made into a slurry.

Trade assurance cement grout mixer and agitator machine is the special equipment of serosity mixing in grouting engineering. Not only it makes the slurry in short time, but has strong power of slurry transportation and is applied to match with various grouting pump.

China high speed cement grouting mixing machine in Bangladesh is a piece of very good equipment for filling materials. It has a good effect on the work of hollow-ground collapse, construction surface strengthening, filling of groundwater openings, etc. China high speed cement grouting mixing machine can quickly inject a large amount of slurry into the corresponding position through the hydraulic system. Help in many constructions.

The high quality cement grout mixer and agitator are mainly used for mixing cement slurry (mortar) similar media. Together with the grouting pump (mortar pump), the cement grout mixer and agitator are used for pressure grouting in tunnel excavation and maintenance, mine engineering, dam construction, foundation treatment engineering of large bridges and high-rise buildings, and various underground engineering.

Cement grout mixer machine with storage is usually equipped with grouting pump and slurry pump to mix and store slurry, with the reasonable structure, high efficiency and simple operation.

Electrical engine grouting mixer with mixing blade is mainly used to mix and prepare similar slurries that need to be mixed in advance, such as cement slurry. Electrical engine grouting mixer with mixing blade adopts a single pulping barrel, and can also work with a simple storage barrel.

After the grouting is finished, the high-speed cement grout mixer machine should be cleaned in time, and the switches should be in the stop and off positions, and the power supply should be cut off in time.

The grout mixer with customized voltage adopts the principle of high-speed eddy current. There is a grout pump impeller below, which can generate high-speed eddy current during operation. The secondary cement high-speed pulping machine has large shear force, fast pulping speed, and high water-cement ratio.

High speed cement slurry grout mixer and agitator  is usually equipped with grouting pump and slurry pump to mix and store slurry, with the reasonable structure, high efficiency and simple operation. The cement slurry grout mixer and agitato has double-deck chambers, including the upper chamber for slurry mixing and the lower chamber for slurry storage.

The high shear grout mixer for mining well-engineering dam construction is special pulping equipment developed for grouting materials with a low water-to-binder ratio. It is mainly used in engineering construction of hydropower, railway, highway, construction, mining, and other industries. The high shear grout mixer for mining well-engineering dam construction can be quickly slurried when mixed with water. Compared with the general blade mixer, it has the characteristics of high pulping efficiency, simple operation, uniform slurry, and short-distance conveying function.

The bentonite grout mixer and storage machine uses a high-speed rotating impeller to suck and discharge the water or slurry in a container, so that it rotates and tumbles to a certain extent in its stroke, and completes the rapid mixing of the added materials.

The concrete continuous coldal colloidal cement grout mixer and agitator machine is a combination consist of a steel sheet cylindrical mixer tank heavy-duty slurry pump and agitator tank, set-up on a strong base frame.

The high-speed cement grout mixer machine continuously performs stirring work, and the interval time shall not exceed 5 minutes.
The high-speed cement grout mixer machine should be rinsed with water after use to prevent the slurry from being used again after solidification.

Add a certain amount of water, turn on the bentonite cement grout mixer, add the powder evenly in the specified order, and control the feeding time at 5-6 minutes, after adding all the powder, continue to stir for 3-5 minutes;

In addition to adding an appropriate amount of water to the high speed grout mixer for cement mixing before loading, the amount of water in the material should also be moderate when stirring, otherwise, the agitator will stop or damage the components due to the large resistance while stirring the material.