High wear resistant hose pump for grouting in construction

When we replace the hose of the industry hose pump peristaltic concrete pumps, first loosen the clamp bolts at both ends, and remove the clamp, then loosen the eyebolt at one end, pull out the short tube at one end from the hose, and move The motor pushes the rubber hose out of the pump, then inserts a new hose from the end of the removed short tube between the pump casing and the pressure roller, starts the motor, puts the hose in, fixes the suspension ring, and installs the hose clip , so far the replacement task is completed.

The high flow peristaltic pump prices are peristaltic pumps suitable for handling corrosive, high-viscosity, high-density products such as abrasive slurries, corrosive acids, gaseous liquids, sand/cement mortars, and liquid accelerators.
The high flow peristaltic pump is a new type of multi-function multi-purpose industrial pump developed by absorbing foreign advanced technology. It completely eliminates the operating mode of the traditional pump impeller, shaft seal, and impurities, and has great advantages in transporting viscous, corrosive, and fluid media.The high flow peristaltic pump working principle is completely different from traditional pumps and has a wide range of applications.

Peristaltic pump for sludge series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. Peristaltic pump for sludge has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

Enter the peristaltic slurry pump for pumping clay-slurries – a versatile and reliable solution for pumping challenging fluids like clay slurries. Unlike conventional pumps that rely on rotating parts to move fluids, peristaltic pumps operate on a completely different principle. The pump’s mechanism involves a flexible tube or hose that is squeezed by rollers or shoes, creating a series of occlusions that push the fluid through the tubing in a pulsating manner. This unique design offers several advantages when it comes to pumping clay slurries.

Squeeze Type Peristaltic Pump Filling Machine installation is very simple and the maintenance cost is very low. Squeeze Type Peristaltic Pump Filling Machine can not only transport gas, liquid and solid media, but also viscous materials.

Innovative Peristaltic Hose Pump for Chemical Handling operate on a unique mechanism that involves compressing and relaxing a flexible hose to create a pumping action. The pump rotor, fitted with rollers or slippers, presses the hose against the pump casing, creating a positive displacement effect. As the rotor rotates, the compression section moves along the hose, pushing the fluid forward. Once the pressure is released, the hose returns to its original shape, creating a vacuum that draws in more liquid. This peristalsis ensures a constant flow rate and prevents any backflow.

The life of a China peristaltic pump for foam concrete is 7-10 years. The challenge lies in the hose of the hose pump, which is the core component of the hose pump, and its life is directly related to the cost of the pump.

Slurry hose pump can transport medium: strong abrasive medium, high specific gravity medium, corrosive medium, high solid content medium, shear sensitive medium, metering application, high viscosity medium, high maintenance cost application, long fiber medium, self-priming occasion and crystalline medium.

Food Grade Liquid Transfer Pump Peristaltic Hose Pump working principle is: – A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump, and is rotated and squeezed along the hose through a pair of pressure rollers.

High efficiency and high yield cement peristaltic pumps usually consist of pump hoses, rotors, rollers, idle rollers, squeeze hoses, drive units, and so on. In the pump house, the squeeze hose is U-shaped, and the hose deforms when the rotor rotates the rollers. After the rollers rotate, the deformed hose recovers due to its elasticity. Therefore, negative pressure creates this hose, sucks the slurry, drains it from the outlet under the push of the roller, and finally forms the pressure transfer of the slurry.

The main factor that determines the life of the peristaltic pump for industry application is the number of compressions; the other is the compression method, strength, and frictional heat.

Widely used high-efficiency peristaltic Industrial hose pump clamps the wheel and squeezes the elastic pump tube to seal the pump tube. At the same time, when the runner moves forward, a large negative pressure will be generated at the rear end of the pump tube.

Concrete soft rubber pump squeeze hose pumps are used for tunnel boring machines and bentonite slurries and transfers. This is the state when you are preparing to ship to the client. Read more about the applications in which these pumps are used.

High-efficiency cement industrial peristaltic pumps can be used to handle high slurries, slurries, and sludges. Unlike diaphragm, rotary lobe and PC pumps, the moving parts of the cement industrial peristaltic pumps do not come into contact with the product and therefore do not require mechanical seals.

The oil drilling project squeeze hose peristaltic pump feature a spring-loaded mechanism to ensure smooth pump operation. This feature is also important for shear-sensitive fluids such as living cells. Another aspect to consider is adjusting the pump’s different tube sizes to the desired flow rate.

Wear-resisting Transfer Peristaltic Pump adopts a geared motor with excellent function as the power source, which provides strong power for the smooth and quiet operation of the hose pump.

The chain transmission type industrial hose peristaltic pump is widely used in metallurgy, rare earth, desulfurization, and environmental protection, wastewater treatment, papermaking, paint, titanium dioxide, compound fertilizer, and other industries.

High efficiency large cement peristaltic pump foam cement pump consists of three parts: screwdriver, pump head, and hose. The objects in the pump tube are isolated, the pump tube can be replaced quickly, the pumped material can be inverted or idling, and the maintenance cost is low.

The high efficiency concrete soft rubber pump belongs to the category of peristaltic pump. The high efficiency concrete soft rubber pump is a kind of rotary volume pump. It is named because its working principle is similar to that of the gastrointestinal tract, which transports gas, solid, and liquid three-phase media by peristalsis. Designers and users of hose pumps attach primary importance to their ability to transport strong abrasive media. High efficiency concrete soft rubber pump has no valves and seals. The only part contacting the medium is the inner cavity of the rubber hose. The rotor of the compressed hose is completely independent of the medium.

High efficiency mine cement peristaltic hose pump is mainly composed of a pump body, slewing frame, extrusion wheel, recovery wheel, hose, and drive system. The hose is arranged in a U-shape in the pump body, when the slewing frame drives the extrusion wheel to rotate, the hose is elastically deformed due to the backlog of the extrusion wheel, forming a negative pressure suction slurry at the suction port, and discharging from the discharge outlet through the push slurry of the extrusion wheel.