Hydraulic motor industrial peristaltic hose pump

When replacing the hose of an Industrial peristaltic pump with long service life, first loosen the pipe clamp bolts at both ends, remove the pipe clamp, then loosen the lifting ring bolt at one end, pull out one end of the short pipe from the hose, and press

The small hose pump machine for sale work by squeezing the hose through rollers or sliders. The small hose pump machine for sale can run dry, self-priming and handle high viscosity, high abrasive media.

The industrial peristaltic pump price is absorbing the foreign advanced technology and the development of a new, multifunction, and multipurpose industrial pump. It is completely out of the running mode of the traditional pump.
The impeller and shaft seal and impurities on the viscosity, corrosive, fluid medium transport has a great advantage, using the principle of very different from the traditional pump, wide application range. The industrial peristaltic pump is in the form of the structure: vertical, horizontal pump. Pump into the form of the hose: single pipe pump, double pump. The pump according to the sealing form is divided into Sealed Structures.

Peristaltic hose pump for cement and foam concrete has strong self-priming ability and self-arranging ability, and can suck materials in both positive and negative directions; simple hose device, simple installation engineering repair, low repair cost, and easy operation.

Slurry peristaltic hose pump can transport medium: strong abrasive medium, high specific gravity medium, corrosive medium, high solid content medium, shear sensitive medium, metering application, high viscosity medium, high maintenance cost application, long fiber medium, self-priming occasion and crystalline medium.

Industrial Hose Peristaltic Pump Liquid Filling Machine is to release the pumped fluid by extruding the pump elastically and alternately squeezing the hose, so as to achieve the purpose of feeding, just like squeezing the hose with two fingers, with the movement of the fingers, the negative pressure is formed in the tube.

High quality industrial wear-resisting peristaltic pump is a new multifunctional multipurpose industrial pump developed by absorbing the advanced technology of foreign countries.

The high flow rate customized peristaltic pump should have a hose compression adjustment device, which needs to be adjusted continuously during the use of the pump to prevent internal leakage and flow drop.

A high-quality high flow industrial peristaltic pump has a service life of 7-10 years. The biggest challenge lies in the hose of the hose peristaltic pump.

The high flow rate hose squeezes peristaltic pump has no seals, ball valves, diaphragms, gaskets, submerged rotors, stators and pistons that could cause leakage, clogging, and corrosion in the hose pump. The high flow rate hose squeezes peristaltic pump transfer abrasive slurries, corrosive acids, and gaseous fluids as easily as water. The high flow rate hose squeezes peristaltic pump does not need auxiliary equipment when it works: no check valve, sealing water flushing system, and dry running protection can be carried out.

Industrial Corrosive Liquid Peristaltic Pumps should always pay attention to the integrity of the hose. Generally, it is better to run at a medium speed. When the hose is found to be aging, the hose should be replaced in time.

The low price concrete peristaltic pump simply replaces the fingers with rollers. Fluid is pumped by alternately squeezing and releasing the pump’s elastic delivery hose.

The unique technical functions of the peristaltic hose pump for transferring material make it widely used, such as the transportation of drilling mud and crude oil, gasoline, kerosene, and other organic solvents and fuel oil in the petroleum industry; acid, alkali, salt, and Phosphoric acid feed pump.

When it comes to choosing the right tube for a industrial hose concrete delivery pump replacement, proper tube size selection is critical. If the key is to maximize the life of the industrial hose concrete delivery pump tube, then a large inner diameter tube and low motor speed are very beneficial. To achieve high flow, choose large inner diameter tubing and high motor speed. If the application requires high precision, then the inner diameter of the tube should be minimized and the motor speed should be high. To pump viscous liquids, the walls should be thick to ensure quick recovery.

When we replace the hose of the industry hose pump peristaltic concrete pumps, first loosen the clamp bolts at both ends, and remove the clamp, then loosen the eyebolt at one end, pull out the short tube at one end from the hose, and move The motor pushes the rubber hose out of the pump, then inserts a new hose from the end of the removed short tube between the pump casing and the pressure roller, starts the motor, puts the hose in, fixes the suspension ring, and installs the hose clip , so far the replacement task is completed.

The high abrasion rubber industrial hose peristaltic pumps are positive displacement pumps, with or without mechanical seals, with strong self-priming ability, self-cleaning and other characteristics; without pump valves and stuffing boxes, there will be no leakage and air resistance of sealed pumps.

The adjustable flow rate peristaltic pump work by squeezing the hose through rollers or sliders. Hose pumps can run dry, self-priming, and handle high viscosity, high abrasive media.

Industrial series hose squeeze peristaltic pump is like squeezing a fluid-filled hose with your fingers, and as the finger slides forward, the fluid in the tube moves forward.

Self Priming Peristaltic Pump for Sludge series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. Self Priming Peristaltic Pump for Sludge has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

High efficiency mine cement peristaltic hose pump is mainly composed of a pump body, slewing frame, extrusion wheel, recovery wheel, hose, and drive system. The hose is arranged in a U-shape in the pump body, when the slewing frame drives the extrusion wheel to rotate, the hose is elastically deformed due to the backlog of the extrusion wheel, forming a negative pressure suction slurry at the suction port, and discharging from the discharge outlet through the push slurry of the extrusion wheel.