Industrial Corrosive Liquid Peristaltic Pumps

High-efficiency peristaltic concrete hose pump is well-sealed and leak-free. High-efficiency peristaltic concrete hose pump is a positive displacement pump. Its unique non-sealed structure will not produce shaft clearance or another leakage, which fundamentally solves the disadvantages of leakage of the conveying medium, and the work site is clean.

High efficiency mine cement peristaltic hose pump is mainly composed of a pump body, slewing frame, extrusion wheel, recovery wheel, hose, and drive system. The hose is arranged in a U-shape in the pump body, when the slewing frame drives the extrusion wheel to rotate, the hose is elastically deformed due to the backlog of the extrusion wheel, forming a negative pressure suction slurry at the suction port, and discharging from the discharge outlet through the push slurry of the extrusion wheel.

The high flow peristaltic pump prices are peristaltic pumps suitable for handling corrosive, high-viscosity, high-density products such as abrasive slurries, corrosive acids, gaseous liquids, sand/cement mortars, and liquid accelerators.
The high flow peristaltic pump is a new type of multi-function multi-purpose industrial pump developed by absorbing foreign advanced technology. It completely eliminates the operating mode of the traditional pump impeller, shaft seal, and impurities, and has great advantages in transporting viscous, corrosive, and fluid media.The high flow peristaltic pump working principle is completely different from traditional pumps and has a wide range of applications.

When the high flow peristaltic pump for sale works, the high flow peristaltic pump for sale tube is sealed by squeezing the special elastic pump tube. At the same time, the back end of the pump tube will generate negative pressure during the forward movement of the runner.

Good Quality Control China-Made Peristaltic Hose Pump is pollution-free, because the liquid only contacts the pump tube, not the pump body.

The corrosion-resistant extrusion peristaltic pump spot requires careful attention to facility selection. An important piece of equipment that allows squeeze pumps to control flow rate control is a speed control motor or frequency converter.

The hose mini peristaltic pump price has well-designed leakage grooves and return grooves so that the gears can withstand minimal torque forces, reducing bearing loads and wear and improving pump efficiency.
A safety valve is also designed to prevent overloading. The full return pressure of the relief valve is higher than the rated discharge pressure of the hose mini peristaltic pump. In addition, it can be adjusted within the allowable exhaust pressure range depending on the situation. However, please note that the safety valve cannot be used as a pressure-reducing valve for a long period of time. If necessary, the pressure-reducing valve can be installed separately in the pipeline.

The high flow peristaltic pump can easily transport solid, liquid or gas-liquid mixed phase fluid; it can transport various materials with abrasive, corrosive, oxygen-sensitive characteristics and various foods.

Peristaltic sludge pump series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. It has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

The peristaltic hose pump manufacturer pointed out that the hose is a very fragile consumable, and the hose will age after a period of time. During the operation of the water and waste treatment peristaltic pump, the running speed cannot exceed the rated speed of the squeeze pump, which will not only damage the hose but also damage the machine.

Large flow industrial peristaltic hose pump completely gets rid of the operation mode of the traditional pump impeller and shaft seal and has greater advantages for medium transportation with high viscosity, high corrosion, and large fluid impurities.

High efficiency hose pump peristaltic pump for mud cement is absorbing the foreign advanced technology and the development of a new, multifunction and multipurpose industrial pump.It completely out of the running mode of traditional pump impeller and shaft seal and impurities on the viscosity, corrosive, fluid medium transport has a great advantage, using the principle of very different from the traditional pump, wide application range. Peristaltic pump fill equipment can convey high viscosity slurry.

When using an industrial small peristaltic hose pump, pay attention that the pressure regulator should not be too tight. If it is too tight, the hose will be compressed and its service life will be shortened.

The high yield cement peristaltic pump is positive displacement pumps based on the principle of alternate compression of hoses, similar to how the human larynx or intestines work. A rotor or cam is provided along the length of the hose, which compresses it to form a seal and create a strong vacuum to deliver the product to the pump.

High flow extruded concrete hose pump for sale also commonly referred to as a roller pump, is a positive displacement pump used to pump a variety of fluids. The fluid is contained in a flexible tube mounted in a circular pump casing (although linear peristaltic pumps have been made). A rotor has multiple “rollers”, “shoes”, “wipers” or “lobes” compressing flexible tubes attached to the outer circumference of the rotor. As the rotor turns, the portion of the tube under pressure is squeezed closed (or “occluded”), forcing the fluid to be pumped through the tube.

The unique non-sealed structure of the hose concrete delivery peristaltic pump has no leakage and pollution; the advanced rolling technology is adopted, and the pressure roller does not need any lubrication; the self-priming ability and self-cleaning ability are strong, and the material can be sucked forward and backward.

The best quality peristaltic pump for concrete can save a lot of energy consumption. The reason for achieving this low energy consumption is, of course, its unique design advantages. By design, the inside of the pump body is rotated and squeezed along the hose with a pair of pressure rollers, so that the medium is transported in one direction without backflow, and the hose creates a high vacuum in the transport medium and sucks it. increase.

Peristaltic hose Pumps for Concrete with strong self-priming ability are very important for large industries as there are no blocking bubbles or resistances that affect the transfer rate for the transfer of liquids and gases as they can create a vacuum environment in their own right. transmission.

The price of high specification squeeze hose peristaltic concrete pump is better, and the initial investment of the pump is relatively large, but the later consumables only need to be replaced with hoses, which are relatively cheaper and easier to replace.

High quality manufacturers produce industrial peristaltic pumps that rely on a smooth inner wall to push the hose through the rollers. High-quality manufacturers produce industrial peristaltic pump hoses are special rubber hoses with excellent acid resistance and corrosion resistance. Therefore, the hose is kneaded with rollers to prevent the medium from flowing back in one direction. The industrial peristaltic pumps hose carries the medium.