Industrial high-quality transfer peristaltic pump

Food Grade Liquid Transfer Pump Peristaltic Hose Pump working principle is: – A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump, and is rotated and squeezed along the hose through a pair of pressure rollers.

After the peristaltic hose pump for foam concrete is used, if it is not used for a long time, pay attention to cleaning up the sundries in the peristaltic hose pump for foam concrete in time to prevent solidification and agglomeration, which will cause unsmooth material delivery and blockage when it is used again.

Factory hot sale peristaltic pump for concrete work with roller or slider hoses. Hose pumps are dry-running, self-priming, and handle highly viscous abrasive media. Factory hot sale peristaltic pump body does not need to be sealed has no leakage at all and can output a fixed flow volume pump every time.

Industrial peristaltic pumps for high viscosity unique advantages of hose pumps make them more and more widely used in gold smelting, non-ferrous smelting, chemical industry, mining, food processing, brewing, ceramics, water treatment, and other industries.

The high flow rate customized peristaltic pump should have a hose compression adjustment device, which needs to be adjusted continuously during the use of the pump to prevent internal leakage and flow drop.

The oil drilling project squeeze hose pump wears very little when pumping these substances, unlike other rotor pumps or vane pumps, and the core part of the hose pump – the life of the hose has nothing to do with the abrasiveness of the medium.

The low cost industrial peristaltic pump , also known as hose pumps or tube pumps, operate with positive displacement. The rotating drum squeezes the liquid towards the low cost industrial peristaltic pump housing, which feeds the liquid through the tubing.
As the drum moves inside the tube, expansion occurs, creating a vacuum to allow more fluid to enter. During operation, at least one roller will be close to the tube. Thus, no valve is required. The drum is turned directly by a motor or a gearbox.

High efficiency and high yield cement peristaltic hose pump are also known as peristaltic pumps, which consist primarily of pump houses, rotors, rollers, idle rollers, squeeze tubes, and drive units. The squeeze hose of the pump house is U-shaped, and the hose deforms when the rotor drive rotates the roll. After the rollers rotate, the deformed hose recovers due to its elasticity. Therefore, a negative pressure is generated on this hose, which sucks the slurry and drains it from the outlet under the indentation of the roller, eventually forming the pressure transfer of the slurry.

Wode is a leading high flow rate peristaltic pump manufacturers in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China. Many customers choose our hose pump peristaltic. Our high flow rate peristaltic pump has been exported to the South Africa, USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain and Nepal. The export amount is up to USD2000, 000.00. We’ve been a hose pump peristaltic manufacturers for more than ten years.

The gas or other liquids transported by the high viscosity durable low price peristaltic pump are treated without deformation and deterioration. Such functional structure design companies have inherent advantages for high-density liquids or gases.

The cement mortar conveying industrial peristaltic pumps are adjusted with very high precision, which is very beneficial for constant delivery in granulation and coating.

Industrial peristaltic pump with variable speed control, also known as hose pump or tube pump, has become a reliable and universal pumping solution in many industries. Their unique working principle based on peristalsis provides several advantages over traditional pump technology. From pharmacy to food and beverage, from wastewater treatment to agriculture, the application of peristaltic pump has been expanding, which has completely changed all industries with its efficiency, accuracy and reliability.

The oil drilling project squeeze hose pump stand out for their ease of use. Tubes or pump heads can be replaced in seconds. Designs that do not require internal valves have different advantages. Clockwise and counterclockwise operation is possible, and fluid can be delivered in both directions if the process requires it. Since there are no valves, there are fewer restrictions in the pipe, which is beneficial in situations where viscous media needs to be conveyed.

High-Efficiency Industrial high-quality transfer peristaltic pump’s high performance is also reflected in its high sensitivity.

Slurry peristaltic hose pump can transport medium: strong abrasive medium, high specific gravity medium, corrosive medium, high solid content medium, shear sensitive medium, metering application, high viscosity medium, high maintenance cost application, long fiber medium, self-priming occasion and crystalline medium.

The corrosion resistant industrial peristaltic pump price is lower, and corrosion resistant industrial peristaltic pump price is depend on the pump flow and rate.
Problems that should be paid attention to in the use of corrosion-resistant industrial peristaltic pumps.

Electric Hose Pump High Viscosity Liquid Pump is easy to clean and maintenance-free. Electric Hose Pump High Viscosity Liquid Pump is easy to install, easy to operate and can operate 24 hours a day, 7 days a week.

The characteristics of the high quality wholesale peristaltic pumps are as follows:
a) Since there are no sealing parts such as mechanical seals and gland packings, there is no need to worry about the leakage of the sealing part.
b) Since there is no sealing part, it can run dry and be used as a vacuum pump.
c) Because the fluid only passes through the special rubber tube, the impeller, rotor, cylinder, and other moving parts do not touch the liquid and do not stir and foam, so it can be directly transported in the original state.
d) It can be delivered regardless of the direction of discharge or suction. Therefore, the residual fluid in the discharge pipe can be easily discharged by reversing.
e) The parts in contact with the liquid are only rubber, which has good wear resistance and low-speed operation, so it is suitable for the transportation of slurry.

Factory Directly Sell dosing pump for chemical liquid is different from the operation mode of the shaft seal of the traditional impeller and has a completely different principle and application range for the medium transportation of high viscosity, high corrosion, and large fluid impurities from the traditional delivery pump.

As the industrial peristaltic pump manufacturers, we can provide the customized service. The extrusion pipe is arranged in a U shape in the industrial peristaltic pump. When the rotary body drives the extrusion wheel to rotate, the extrusion hose receives the extrusion of the extrusion wheel and undergoes elastic deformation, and then forms a negative pressure slurry at the mouth.