industrial hose pump extrusion pump for construction

High efficiency mine cement peristaltic hose pump is mainly composed of a pump body, slewing frame, extrusion wheel, recovery wheel, hose, and drive system. The hose is arranged in a U-shape in the pump body, when the slewing frame drives the extrusion wheel to rotate, the hose is elastically deformed due to the backlog of the extrusion wheel, forming a negative pressure suction slurry at the suction port, and discharging from the discharge outlet through the push slurry of the extrusion wheel.

The characteristics of the high quality wholesale peristaltic pumps are as follows:
a) Since there are no sealing parts such as mechanical seals and gland packings, there is no need to worry about the leakage of the sealing part.
b) Since there is no sealing part, it can run dry and be used as a vacuum pump.
c) Because the fluid only passes through the special rubber tube, the impeller, rotor, cylinder, and other moving parts do not touch the liquid and do not stir and foam, so it can be directly transported in the original state.
d) It can be delivered regardless of the direction of discharge or suction. Therefore, the residual fluid in the discharge pipe can be easily discharged by reversing.
e) The parts in contact with the liquid are only rubber, which has good wear resistance and low-speed operation, so it is suitable for the transportation of slurry.

The no-load test operation of the rubber peristaltic pump for construction industry is to check whether the rotation and fixed parts of the heat transfer oil pump unit have collision and friction, whether the bearing temperature is normal, whether the unit swing and vibration are qualified, whether various instruments are normal, each oil pipeline, joints, valves, etc. leaks, etc.

The industrial peristaltic pump , also known as hose pumps or tube pumps, operate with positive displacement. The rotating drum squeezes the liquid towards the pump housing, which feeds the liquid through the tubing.

Hose Peristaltic Pump for pumping gold mining slime working principle is that when the motor is driven by the reducer, the squeezing roller rotates along the hose, and the squeezing force generated between the roller and the pump body squeezes the hose.

The main factor that determines the life of the peristaltic pump for industry application is the number of compressions; the other is the compression method, strength, and frictional heat.

High quality manufacturers produce large flow peristaltic hose pumps and play an important role in the industry. It has been used in the industry for many years and has a long history. Its industrial application is mainly a transport function. It belongs to the peristaltic part that transports liquid or gas. But it’s different from squirming. Therefore, it acts as a prayer bridge in industrial development.

When we replace the hose of the industry hose pump peristaltic concrete pumps, first loosen the clamp bolts at both ends, and remove the clamp, then loosen the eyebolt at one end, pull out the short tube at one end from the hose, and move The motor pushes the rubber hose out of the pump, then inserts a new hose from the end of the removed short tube between the pump casing and the pressure roller, starts the motor, puts the hose in, fixes the suspension ring, and installs the hose clip , so far the replacement task is completed.

Self Priming Peristaltic Pump for Sludge series products are a new type, multifunctional, and multipurpose industrial pump developed by absorbing foreign technology. This peristaltic sludge pump gets rid of the running mode of traditional impeller shaft seal, and has advantages in conveying medium with high viscosity, high corrosivity, and large fluid impurities. Self Priming Peristaltic Pump for Sludge has completely different principles from traditional delivery pumps and has a wider application range, especially suitable for sludge treatment.

High quality industrial wear-resisting peristaltic pump is a new multifunctional multipurpose industrial pump developed by absorbing the advanced technology of foreign countries.

After the peristaltic hose pump for foam concrete is used, if it is not used for a long time, pay attention to cleaning up the sundries in the peristaltic hose pump for foam concrete in time to prevent solidification and agglomeration, which will cause unsmooth material delivery and blockage when it is used again.

The cement peristaltic hose pump support custom is a new, multifunction and multipurpose industrial pump developed on the basis of foreign advanced technologies. It breaks away the restrictions of traditional pump impeller and shaft seal and uses a totally different mechanism compared with the traditional pump. The cement peristaltic hose pump support custom is very suitable to transport materials with high viscosity, high corrosivity, and high content of solid particles.

High viscosity rotor pump peristaltic hose pump for cement has a good self-priming ability and can create a vacuum environment by itself. Therefore, for the delivery of liquid or gas, there will be no air bubbles or resistance blocking the flag, affecting the delivery speed. Therefore, this self-priming ability is extremely advantageous for large-scale industrial transportation.

The high-efficiency peristaltic pump for concrete is a new type of multifunctional and multipurpose industrial pump. The high-efficiency peristaltic pump for concrete is especially suitable for solids with high viscosity and has excellent self-priming performance. The high-efficiency peristaltic pump for concrete is widely used in petroleum, chemical, pharmaceutical, construction, and other industries.

Industrial hose pump for oilbase mud is equipment for grouting in mine shafts, railway roads, hydropower projects, rock and soil slopes, underground projects, subways, and municipal construction, as well as blast furnace gunning in steel and chemical industries and building wall spraying.

High specification squeeze hose peristaltic concrete pump does not require continuous delivery of the pumped liquid to the pump and can run dry without costly downtime or maintenance. The recovery action of the hose or pipe creates a powerful self-priming action that allows the pump to deliver liquids containing buoyancy or waste gas.

A special rubber hose with a smooth inner wall and reliable strength is installed inside the manufacturer produces extrusion hose pump body, and is rotated and squeezed along the hose by a pair of pressure rollers. After the medium, under the force of the flattened hose’s own elasticity and the side guide rollers, the hose returns to its original state.

In recent years, we have also provided matching extruded industrial hose pumps for sale to manufacturers in China. Extruded industrial hose pump for sale are widely applied in construction, underground construction, petroleum chemical industry, metallurgy, food industry, ceramics, mining, water treatment, pharmacies, and papermaking.

The corrosion-resistant extrusion peristaltic pump spot requires careful attention to facility selection. An important piece of equipment that allows squeeze pumps to control flow rate control is a speed control motor or frequency converter.

The longer industrial peristaltic pumps do not have a seal structure, so there is no need to worry about medium leakage that contaminates the hose pump. The longer industrial peristaltic pump adopts advanced rolling technology so that the pressure roller can smoothly complete a series of tasks without lubrication during operation.