Home » Hose Pump » Industrial peristaltic pump with long service life

Industrial peristaltic pump with long service life

When replacing the hose of an Industrial peristaltic pump with long service life, first loosen the pipe clamp bolts at both ends, remove the pipe clamp, then loosen the lifting ring bolt at one end, pull out one end of the short pipe from the hose, and press

Rated 4.9/5 based on 366 customer reviews
Share:
Content

When replacing the hose of an Industrial peristaltic pump with long service life, first loosen the pipe clamp bolts at both ends, remove the pipe clamp, then loosen the lifting ring bolt at one end, pull out one end of the short pipe from the hose, and press The motor pushes the hose out of the pump; then insert a new hose from the end of the removed short tube between the pump casing and the roller, jog the motor, and install the hose; then fix the lifting ring and install the tube clamp, the replacement task is now complete. Pay special attention to when re-installing the hose, make sure that the hose is tightly attached to the pump casing, and then it can be put into normal operation after confirmation.

Inquiry


    More Hose Pump