Large flow peristaltic hose pump for conveying sewage sludge

The hose pump for foam cement plays an important role in the industry. The hose pump for foam cement has been used in the industry for many years and has a long history. Its industrial use is mainly for transportation functions. It belongs to the peristaltic part that transports liquids and gases.

The direct sales support custom low prices industrial hose pump mainly consist of pump houses, rotors, rollers, idle rollers, squeeze tubes and drive units. The squeeze hose of the pump house is U-shaped, and the hose deforms when the rotor drives the rollers to rotate.

High-efficiency large cement peristaltic pump combines the compactness of a close-coupled pump with the reliability and ease of maintenance of a long-shaft pump design. High-efficiency large cement peristaltic pump inline design incorporates heavy-duty bearings into the pump rotor, thus eliminating any overhanging loads.

The adjustable flow rate viscosity peristaltic pump is a special pump that does not need any mechanical seal. It uses the motor to drive the pressure roller on the rotor to alternately squeeze the special hose installed in the pump chamber, and form a vacuum through the compression and rebound of the hose, thereby To achieve the purpose of suction and conveying materials, the conveyed materials only contact with the inner wall of the hose.

Large flow rate high-efficiency cement peristaltic pump unique non-sealed structure is free of any leakage and pollution; the advanced rolling technology is adopted, and the pressure roller does not need any lubrication; the self-priming ability and self-cleaning ability are strong, and can suck materials in both positive and negative directions;

Low price squeeze pump peristaltic pump for sale has the ability to carry the same flow in both directions; it will not cause any damage to any part of the pump under the condition of no liquid empty work; there is no valve, mechanical seal and packing sealing device, so there are no elements that produce leakage and protection; it can transport various parts.

The cheap customized 220v peristaltic pump has a complete structure and does not use seals, so there will be no leakage, and there is no leakage self-priming pump in the case of high on-site management requirements.

There is no hose for a peristaltic hose pump for transfer that can withstand all media. Therefore, it is necessary to confirm the type of medium, compare it with the chemical compatibility table or make sure that the pump tube can be used through the immersion test.

Widely Used Squeeze peristaltic hose Pumps completely gets rid of the operation mode of traditional pump impeller and shaft seal, and has great advantages in conveying medium with high viscosity, high corrosion, and large fluid impurities. It is a completely different principle from traditional conveying pumps and has a wide range of applications.

Various capacity peristaltic pump tubing chemicals are very easy to install and very easy to maintain. Not only can media such as gases, liquids, and solids be transported, but viscous substances can also be transported. This is because the rubber hose inside the peristaltic pump tubing chemical absorbs the contaminant material and prevents various objects from clogging the hose pump.

The life of a China peristaltic pump for foam concrete is 7-10 years. The challenge lies in the hose of the hose pump, which is the core component of the hose pump, and its life is directly related to the cost of the pump.

The characteristics of the high quality wholesale peristaltic pumps are as follows:
a) Since there are no sealing parts such as mechanical seals and gland packings, there is no need to worry about the leakage of the sealing part.
b) Since there is no sealing part, it can run dry and be used as a vacuum pump.
c) Because the fluid only passes through the special rubber tube, the impeller, rotor, cylinder, and other moving parts do not touch the liquid and do not stir and foam, so it can be directly transported in the original state.
d) It can be delivered regardless of the direction of discharge or suction. Therefore, the residual fluid in the discharge pipe can be easily discharged by reversing.
e) The parts in contact with the liquid are only rubber, which has good wear resistance and low-speed operation, so it is suitable for the transportation of slurry.

In recent years, the development and application of various new materials is an important factor driving the development of industrial hose pump technology. A variety of new materials are used in the parts of the hose pump, and the benefits are mainly to extend the service life and reliability of the hose pump in corrosive media and to expand the scope of use of the industrial hose pump for conveying mud and cement.

Multifunction Hose Peristaltic Pump for sale, also known as peristaltic pump, is a new type of industrial pump. It is the product of the development of modern industry.

Good Quality Control China-Made Peristaltic Hose Pump is pollution-free, because the liquid only contacts the pump tube, not the pump body.

Enter the Peristaltic Dosing Pump for Ceramic Slurry Liquid – a versatile and reliable solution for pumping challenging fluids like clay slurries. Unlike conventional pumps that rely on rotating parts to move fluids, peristaltic pumps operate on a completely different principle. The pump’s mechanism involves a flexible tube or hose that is squeezed by rollers or shoes, creating a series of occlusions that push the fluid through the tubing in a pulsating manner. This unique design offers several advantages when it comes to pumping clay slurries.

Peristaltic pump, also known as hose pump or tube pump, has become a reliable and universal pumping solution in many industries. Their unique working principle based on peristalsis provides several advantages over traditional pump technology. From pharmacy to food and beverage, from wastewater treatment to agriculture, the application of Portable peristaltic pump for on-the-go applications has been expanding, which has completely changed all industries with its efficiency, accuracy and reliability.

The challenge of Industrial peristaltic pump with long service life is the hose of the hose pump, which is a component of the hose pump, and its life is directly related to the cost of the pump. It can be said that the design of the hose pump is carried out around the hose life.

Slurry peristaltic hose pump can transport medium: strong abrasive medium, high specific gravity medium, corrosive medium, high solid content medium, shear sensitive medium, metering application, high viscosity medium, high maintenance cost application, long fiber medium, self-priming occasion and crystalline medium.

High Quality Squeeze Industrial Hose Pump can transport all kinds of materials with abrasive and corrosive properties and various foods; only the hose is the part that needs to be replaced, and the replacement operation is simple.