Manufacturer produces extrusion hose pump

High quality industrial wear-resisting peristaltic pump is a new multifunctional multipurpose industrial pump developed by absorbing the advanced technology of foreign countries.

The reason for the reduced service time of the High-quality Peristaltic Hose Pump sales may be due to abnormal hose failure, namely, tear damage and sudden rupture. The factors that affect the normal failure of the hose are the shape, quantity, diameter, rotation speed, and squeezing force of the hose.

Slurry hose pump can transport medium: strong abrasive medium, high specific gravity medium, corrosive medium, high solid content medium, shear sensitive medium, metering application, high viscosity medium, high maintenance cost application, long fiber medium, self-priming occasion and crystalline medium.

When the peristaltic hose pump for pumping sludge and mining slurry is used for about 200 hours, the hose can be rotated 90 degrees. In addition to the rotation direction of the single-tube hose pump, the hose can be switched back and forth to change the pressure point of the hose and prolong its service life of the hose.

The high efficiency widely used concrete peristaltic pump has a strong self-priming capacity and has the advantages of high lift, high viscosity, and high solid content fluid supply.

Correct maintenance can not only prolong the service life of cheap customized 220v industrial hose peristaltic pumps but also eliminate potential safety hazards and ensure production safety. The cheap customized 220v industrial hose peristaltic pump working environment is special, and the daily maintenance requirements are relatively high.

Industrial hose pump peristaltic pump with hydraulic motor is a “pillow” shaped fluid formed by a section of pump tubing between two rotating rollers

Clean the pump head in time after using the Large Volume for Concrete Hose Peristaltic Pump. If it is not used for a long time, please remove the hose to extend its service life. Hoses are vulnerable items.

Large output peristaltic pump slurry pump is a new multi-function and multi-purpose industrial pump developed on the basis of foreign advanced technology. Breaking through the limitations of conventional pump impellers and shaft seals, it adopts a completely different mechanism from conventional pumps.

Wode Equipment Co., Ltd. is a leading Peristaltic Hose Pumps for Water and Wastewater Treatment manufacturer in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China.
Many customers choose our Peristaltic Hose Pumps for Water and Wastewater Treatment. Our industrial hose pump has been exported to the South Africa, USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain and Nepal. The export amount is up to USD2000, 000.00. We’ve been an industrial hose pump manufacturer for more than ten years. To choose reliable supplier, contact us now!

China factory manufacturer concrete industrial peristaltic hose pump advantage is that they can significantly reduce overall energy consumption during operation.

High Viscosity Hose Pump Corrosive Material Conveyor Pump designers and users are primarily interested in its ability to transport highly abrasive media. It has no valve, no seal, and the only part in contact with the medium is the inner chamber of the rubber hose, the rotor of the compression hose is completely independent of the medium.

The factory directly sell high-flow peristaltic pump is flattened the elastic pump tube by squeezing the wheel, and then making the pump tube airtight. At the same time, during the forward movement of the runner, a huge negative pressure will be generated at the rear end of the pump tube. Because the hardness and resilience of the hose are super large, the negative pressure is also very large. This negative pressure is enough to suck the fluid, and then push the liquid in the pump tube out with the movement and alternation of the runner.

When the high efficiency widely used concrete peristaltic Industrial Hose Pump is subjected to pumping, the hose is successively squeezed by the compression shoes mounted on the rotating wheel. By squeezing the hose wall, the first shoe creates a vacuum and draws the pumped liquid into the hose.
Once the pumped liquid enters the hose, the second roller presses through the hose and pushes the liquid towards the pump outlet.
When the discharge side shoe is separated from the hose, the opposite shoe is already in compression, preventing any backflow. The pumped fluid is then successfully sucked in and pushed out due to the rotational action of the impeller.

The high flow peristaltic pump prices are peristaltic pumps suitable for handling corrosive, high-viscosity, high-density products such as abrasive slurries, corrosive acids, gaseous liquids, sand/cement mortars, and liquid accelerators.
The high flow peristaltic pump is a new type of multi-function multi-purpose industrial pump developed by absorbing foreign advanced technology. It completely eliminates the operating mode of the traditional pump impeller, shaft seal, and impurities, and has great advantages in transporting viscous, corrosive, and fluid media.The high flow peristaltic pump working principle is completely different from traditional pumps and has a wide range of applications.

Industrial peristaltic pump for paper marking also is more and more widely used in gold smelting, non-ferrous smelting, the chemical industry, mining, food processing, brewing, ceramics, water treatment, and other industries.

When using the peristaltic hose pump for conveying sewage sludge, please do not tighten the pressure regulating plate too much, so as not to “stick” the pump head. Generally, it can be adjusted until there is liquid flowing out. The hose should be coated with lubricating oil inside the pump head to prolong its use.

Widely Used Heavy Duty Continuous Transfer Industrial Peristaltic Hose Pump has no sealing structure, there is no need to worry about medium leakage, which will pollute the hose pump, and the self-priming ability is particularly strong, and it can be cleaned by itself.

The adjustable flow rate viscosity peristaltic pump is a special pump that does not need any mechanical seal. It uses the motor to drive the pressure roller on the rotor to alternately squeeze the special hose installed in the pump chamber, and form a vacuum through the compression and rebound of the hose, thereby To achieve the purpose of suction and conveying materials, the conveyed materials only contact with the inner wall of the hose.