Refractory dry shotcrete machine for coal mine tunnel dams pools

As the refractory dry shotcrete machine manufacturers, we manufacture the refractory dry shotcrete machine adopts low-pressure and high-speed vortex air conveying, which overcomes the problems of sticking, pipe blocking, and pulse separation during material conveying.

The refractory dry shotcrete machine for sale uses compressed air or other power to transport the finished concrete mixed with water to the nozzle through the pipeline. After mixing with accelerators, it forms a material bundle, which is sprayed on the sprayed surface, and then condenses and hardens on the surface to form a concrete coating.

Latest Technology refractory gunite concrete spray machine can be applied to spraying work in flammable and explosive dangerous environments such as underground coal mines, metal mines, tunnels, subways, and high-marsh high-dust mines.

The castable gunning machine for sale adopts a straight-through rotor-type non-adhesive material cavity, which can discharge the material smoothly and save time.

The shotcrete machine used for spraying refractory materials uses compressed air to spray a proportion of refractory material at high speed to form a refractory layer on the surface of the sprayed masonry. The shotcrete machine used for spraying refractory materials is widely used and is mainly applied to heat guns in the refractory layer of industrial furnaces.

Traditionally, the installation of refractory materials is a labor-intensive and time-consuming process, which usually involves manual application methods, such as casting or manual ramming. However, with the development of technology, the Refractory Construction Gunning Machine appeared in the refractory industry. Fire-resistant gunning machine, also known as fire-resistant shotcrete machine, is a special equipment for spraying fire-resistant materials efficiently and accurately. The working principle of the machine is to mix the refractory with water, and then pump it to the nozzle through the hose, where the refractory is pushed to the surface to be lined at high speed.

Refractory spraying gunite machine for blast furnace is mainly used for thermal spraying of the refractory layer of industrial furnaces. It is mainly suitable for concrete spraying and supporting the construction of medium coal tunnels, culverts, subways, hydropower projects, underground projects, mine roadways, highway slope protection, etc. and the thermal gunning operation of the refractory layer of the industrial furnace.

Refractory castable gunning machine for refractory material is specially designed for spraying refractory materials in steel plant. Refractory dry mix gunning machine in china have large different with common dry mix shotcrete machine. Usually, refracotory gunning machine is equipped with ABB frequency inverter, could achieve variable output in the use.

Large flow wet refractory coating machine has the advantages of high construction efficiency, stable construction quality, strong construction safety, and a good construction environment, which can better meet the increasingly high construction quality and construction period requirements in the domestic construction field.

The refractory gunite machine equipment in steel plant is a machine developed for spraying various powder and granular auxiliary materials or solvents into the melt in converters, electric furnaces, ladle, ladle, mixing furnace, refining equipment, and other furnaces.

The castable gunning machine for concrete is mainly suitable for concrete spraying and supporting the construction of tunnels, culverts, subways, hydropower projects, underground projects, mine roadways, highway slope protection, etc.

The slop protection refractory concrete gunite machine has the functions of stirring, conveying, and spraying; the watering quality is good, the construction speed is fast, and labor is saved.
The slop protection refractory concrete gunite machine can be used for gunning metallurgy and industrial furnaces and is widely used in steel mills, etc.

Wode Equipment as refractory gunning machine manufacturer has developed two different output castable gunning machine, WZ-3ER (3m3/h) and WZ-5ER (5m3/h). Every model refractory gunning machine, all been equipped with an ABB frequency converter, high-pressure water pump, and new type pre-dampening nozzle. ABB frequence converter could adjust the motor speed and control the output, on the other hand, could avoid clogging the hose due to excessive output when starting. High pressure water pump could provide high pressure water for gunning machine, when going through the water ring hole atomization, could make water and refractory castable materials fully mixed with refractory pre-wet. In the new type pre-dampening nozzle, there are two needle valves to control two water lines. The operator could adjust the needle valve to precise control of water amount, if so, greatly reduces operator proficiency requirements.

Convenient operation construction refractory shotcrete machine?is the most ideal device for the concrete anchor spray construction, wet spray and moist spray. And be widely used for the anchor spray supporting construction in tunnel, culvert and underground projects. And uniquely-made rubber bushing block on the swirler benefits mixture delivery.

The dry mix refractory gunite shotcrete machine for kiln working is the delivery hose to the nozzle to project the material onto the sprayed surface with high velocity, and then to form a concrete support layer after the projected material coagulates and hardens.

Widely used swimming pools concrete refractory spray shotcrete machine has been widely praised by customers and is mainly used in mine shafts, hydropower projects, railway, and highway tunnels, subway projects, bridge maintenance, slope support, civil air defense projects, municipal construction projects, environmental greening projects, etc. With its excellent performance, refractory shotcrete equipment is sold all over the world.

Best quality refractory gunite concrete spray equipment for tunnel is designed for spraying refractory materials that can be poured in steel mills. Unlike normal dry mix shotcrete machines, there are ABB frequency converters, new pre-attenuated nozzle assemblies, and high-pressure water pumps for refractory gunite concrete spray equipment. ABB drives are used to adjust the output from 1m3/h to 3m3/h. If the output volume increases when spraying starts, the material can block the delivery of the delivery hose

The gunning machine for refractory price adopts the principle of forced feeding pneumatic conveying: the gunning material enters the pressure vessel through the silo and the feeding valve, and after closing the feeding valve, the gunning material in the gunning machine is sent to the spray gun by compressed air, evenly mixed with water and sprayed to the working surface.

Most of the refractory dry shotcrete machines operate in relatively harsh environments and the operating site often changes due to changes in geological conditions, so its performance is affected by the temperature, humidity, and geological conditions of the operating site.

The refractory coating machine for refractory material is equipped with ABB frequency inverter, and could achieve variable output from 1m3/h to 3m3/h. Compared with the common dry mix shotcrete machine, refractory dry mix gunning machine is also provided new type pre-dampening nozzle assy, it is equivalent to a pre-wet system,