Shotcrete Guniting Machine Price in Indonesia is a device integrating feeding, mixing, continuous conveying, and spraying. It is one of the best comprehensive equipment for reducing dust, reducing rebound, and saving cement at home and abroad.
During the construction of the hot sale dry shotcrete gunite machine in canada, the operator should pay close attention to the liquid level agent and the pressure gauge of the accelerator on the accelerator tank.
Hot sell concrete spraying machine for dry mix shotcreting is suitable for relatively harsh field conditions and requires very little maintenance.
After each shotcrete construction is completed, Hot selling products concrete pump machine for sale should be cleaned, especially the surface of the sealing plate and the rotor lining plate; at the same time, the wear of the sealing plate and the rotor lining plate should be checked, if the sealing plate has been worn to such an extent.
Before each shotcrete of the new type shotcrete machine concrete shotcrete pump, check the pressing force applied to the rubber sealing plate and the rotor liner.
High quality low price gunite shotcrete machine equipment for sale is mainly composed of a driving device, rotor assembly, sealing system, vibrating hopper, air duct system, injection system, accelerator adding system, etc.
The hot sale dry shotcrete gunite machine in Canada adopts a unique straight-through anti-stick material rotor, and each round hole is lined with a material cavity made of non-adhesive material, which improves the machine’s ability to handle wet materials and reduces the workload of cleaning and maintenance.
Hot sell concrete spraying machine for dry mix shotcreting starts to spray normally, firstly open the auxiliary air valve of the accelerator and the main air valve, then open 2/3 of the upper air valve, and open all the lower air valves.
Hot selling products concrete pump machine for sale is working, if there is no material ejected from the nozzle suddenly, the reason may be when the pipe is about to be blocked.
When the new type of shotcrete machine concrete shotcrete pump is in operation, if there is no material ejected suddenly from the nozzle, it may be that the pipe is blocked, and the conveying pipe has been blocked.
Before the construction of the approved tunnel concrete shotcrete machine for sale, it is necessary to check whether the specifications of the roadway meet the design requirements.
During the construction of the cheap price shotcrete machine for tunnels, the assistant behind the sprayer should assist the sprayer to straighten the conveying pipeline on time, so as to avoid the pipe being blocked due to sharp bends and suffocation caused by the sprayer changing the spraying position.
Dry Shotcrete Gunite Machine With Compact Structure during work, it is strictly forbidden to stand in the spraying range; when the spraying operation is interrupted for a short time, the sprayed material can be stored in the sprayer hopper.
Dry Type Cement Concrete Shotcrete Spraying Machine is a new type of high-efficiency concrete spraying machine, which is mainly used for concrete spraying.
The working principle of the high-quality concrete spraying shotcrete pump machine sales is through the concrete mixing station, and the mixed material is mixed according to a certain water-cement ratio, and the aggregate ratio is added to the hopper, enters the material cavity of the rotor through the screen, and rotates with the rotor to the discharge port.
When using the wet type rotor concrete shotcrete machine for the initial spraying, the rock surface should be sprayed with water and sprayed enough to the design thickness. This inch of stable surrounding rock is extremely important. When re-spraying, the steel arch or net should be sprayed flat, and the spray should be thick enough.
The most likely safety accidents of the wet type shotcrete spraying machine for sale during the spraying process are rock slumps or concrete spalling on the face, injuring the machine, falling, falling, or other contact accidents due to the incorrect working standing position and working posture of the personnel
Best Seller wet-mix shotcrete machines are widely used in building wall spraying, slope protection, tunnel construction, and other places where there is no harmful gas and concrete spraying is required.
The main features and advantages of the low price hydraulic type wet shotcrete machine lie in the straight-through rotor type non-bonding material cavity, the material discharge is smooth, efficient, and time-saving.
The operation of the Low price shotcrete concrete pump machine should first supply the air, then the water, and then the material. After the spraying, the material should be stopped first, then the air should be stopped, and then the water should be stopped.
