grass seed hydroseeder machine

Start the engine of the 8000l capacity hydroseeding machine at least once a month, check the operation of the engine, and run it at idle speed for 4-5 minutes. If there is any abnormal phenomenon, it needs to be adjusted and repaired in time.

During the construction process of the abrasion resistance spraying grass seed hydroseeder machine, the spray gun head suddenly cannot be discharged, please quickly shut down the engine and inject the diesel engine.

After the Chinese hydroseeding machine for landscaping mixes the material evenly and is ready to spray, lift the poppet valve. Properly adjust the Chinese hydroseeding machine for landscaping spray angle of the nozzle according to the conditions of the construction site, and select the appropriate nozzle diameter.

After the Chinese slope hydroseeding machine is finished, please be sure to release the water from the road and the spraying pump, mainly because after the temperature reaches below zero in winter, the water in the pipeline and the spraying pump will freeze, resulting in expansion and extrusion of the pipeline and the spraying pump.

The dust, dirt, and moisture on the desert control small hydroseeding machine should be removed in time. The parts that are prone to rust and the surface of the machine parts should be coated with oil, grease, or wrapped with oil paper.