high efficiency peristaltic pump

The factory directly sell electric peristaltic pump is a type of rotor-type volumetric pump, named for its working principle similar to the digestive tract to transport gas, solid and liquid three-phase media in a peristaltic manner. There is no strict distinction between hose pumps and peristaltic pumps.

The high abrasion peristaltic pump with silicone tubing has no valve, no seal, the only part in contact with the medium is the inner cavity of the rubber hose, and the rotor of the compression hose is completely independent of the medium.

In addition, the high efficiency peristaltic pump has many unique features: no other pump has better self-priming ability than the hose peristaltic pump, which can generate almost perfect vacuum to suck liquid; transport air-containing liquid, foam liquid without air It is also strong in conveying high viscosity and shear sensitive media; the fixed displacement per revolution has nothing to do with the outlet pressure, and it is a natural metering pump.

A high-quality high flow industrial peristaltic pump has a service life of 7-10 years. The biggest challenge lies in the hose of the hose peristaltic pump.

The high flow rate customized peristaltic pump should have a hose compression adjustment device, which needs to be adjusted continuously during the use of the pump to prevent internal leakage and flow drop.

The low price concrete peristaltic pump is also known as hose pumps, rigid tube pump, or roller pump. They can transfer virtually any fluid in a variety of markets and applications, providing a reliable and simple solution.
The low price concrete peristaltic pump can deliver, dose, or meter a range of fluids including cosmetic lotions, abrasive slurries, or sodium hypochlorite.

The high efficiency peristaltic pump stand out for their ease of use. Tubes or high efficiency peristaltic pump heads can be replaced in seconds. Designs that do not require internal valves have different advantages. Clockwise and counterclockwise operation is possible, and fluid can be delivered in both directions if the process requires it. Since there are no valves, there are fewer restrictions in the pipe, which is beneficial in situations where viscous media needs to be conveyed.

When the high efficiency widely used concrete peristaltic Industrial Hose Pump is subjected to pumping, the hose is successively squeezed by the compression shoes mounted on the rotating wheel. By squeezing the hose wall, the first shoe creates a vacuum and draws the pumped liquid into the hose.
Once the pumped liquid enters the hose, the second roller presses through the hose and pushes the liquid towards the pump outlet.
When the discharge side shoe is separated from the hose, the opposite shoe is already in compression, preventing any backflow. The pumped fluid is then successfully sucked in and pushed out due to the rotational action of the impeller.

When it comes to choosing the right tube for a industrial hose concrete delivery pump replacement, proper tube size selection is critical. If the key is to maximize the life of the industrial hose concrete delivery pump tube, then a large inner diameter tube and low motor speed are very beneficial. To achieve high flow, choose large inner diameter tubing and high motor speed. If the application requires high precision, then the inner diameter of the tube should be minimized and the motor speed should be high. To pump viscous liquids, the walls should be thick to ensure quick recovery.

The low cost industrial peristaltic pump , also known as hose pumps or tube pumps, operate with positive displacement. The rotating drum squeezes the liquid towards the low cost industrial peristaltic pump housing, which feeds the liquid through the tubing.
As the drum moves inside the tube, expansion occurs, creating a vacuum to allow more fluid to enter. During operation, at least one roller will be close to the tube. Thus, no valve is required. The drum is turned directly by a motor or a gearbox.