industrial peristaltic concrete tube pump

The principle of the industrial peristaltic concrete tube pump for pumping sludge and mining slurry is the same as the principle of the peristaltic pump. The runner squeezes the industrial peristaltic concrete tube pump tube and rotates to push the fluid in the tube forward, creating a fluid flow similar to squeezing with two fingers.

Industrial peristaltic pump with flow has higher hardness and strong suction and can self-suck very viscous liquids with very high solid content, such as cement mortar and various mineral oars.
Hose pumps have many advantages, such as strong self-priming, and corrosion resistance, and can transport materials mixed with solid, liquid, and gas three-phase, and will not damage the pump during dry operation.

When replacing the hose of an Industrial peristaltic pump with long service life, first loosen the pipe clamp bolts at both ends, remove the pipe clamp, then loosen the lifting ring bolt at one end, pull out one end of the short pipe from the hose, and press

Industrial squeeze hose peristaltic pump for foam cement features determines that the squeeze hose peristaltic pump can solve many problems that ordinary pumps cannot solve. When you encounter transportation problems that cannot be solved by ordinary pumps, you can consider whether the industrial hose pump can meet your requirements.

When the peristaltic hose pump for pumping sludge and mining slurry is used for about 200 hours, the hose can be rotated 90 degrees. In addition to the rotation direction of the single-tube hose pump, the hose can be switched back and forth to change the pressure point of the hose and prolong its service life of the hose.