peristaltic hose pump

Factory hot sale peristaltic pump for concrete work with roller or slider hoses. Hose pumps are dry-running, self-priming, and handle highly viscous abrasive media. Factory hot sale peristaltic pump body does not need to be sealed has no leakage at all and can output a fixed flow volume pump every time.

Industrial hose pump for oilbase mud is equipment for grouting in mine shafts, railway roads, hydropower projects, rock and soil slopes, underground projects, subways, and municipal construction, as well as blast furnace gunning in steel and chemical industries and building wall spraying.

Industrial Squeeze Hose Peristaltic Pump for Concrete products are the main equipment for conveying fluid media, and many factors such as particle size affect the normal operation of the pump.

After the peristaltic hose pump for foam concrete is used, if it is not used for a long time, pay attention to cleaning up the sundries in the peristaltic hose pump for foam concrete in time to prevent solidification and agglomeration, which will cause unsmooth material delivery and blockage when it is used again.

There is no hose for a peristaltic hose pump for transfer that can withstand all media. Therefore, it is necessary to confirm the type of medium, compare it with the chemical compatibility table or make sure that the pump tube can be used through the immersion test.

The principle of the industrial peristaltic concrete tube pump for pumping sludge and mining slurry is the same as the principle of the peristaltic pump. The runner squeezes the industrial peristaltic concrete tube pump tube and rotates to push the fluid in the tube forward, creating a fluid flow similar to squeezing with two fingers.

Industrial peristaltic pump with flow has higher hardness and strong suction and can self-suck very viscous liquids with very high solid content, such as cement mortar and various mineral oars.
Hose pumps have many advantages, such as strong self-priming, and corrosion resistance, and can transport materials mixed with solid, liquid, and gas three-phase, and will not damage the pump during dry operation.

When replacing the hose of an Industrial peristaltic pump with long service life, first loosen the pipe clamp bolts at both ends, remove the pipe clamp, then loosen the lifting ring bolt at one end, pull out one end of the short pipe from the hose, and press

Industrial squeeze hose peristaltic pump for foam cement features determines that the squeeze hose peristaltic pump can solve many problems that ordinary pumps cannot solve. When you encounter transportation problems that cannot be solved by ordinary pumps, you can consider whether the industrial hose pump can meet your requirements.

When the peristaltic hose pump for pumping sludge and mining slurry is used for about 200 hours, the hose can be rotated 90 degrees. In addition to the rotation direction of the single-tube hose pump, the hose can be switched back and forth to change the pressure point of the hose and prolong its service life of the hose.

Depending on the structure of the pump, the hot sale peristaltic hose pump can be divided into vertical and horizontal pumps. Depending on the closed type, it can be divided into open pumps, semi-sealed pumps, and full-sealed pumps. The hot sale peristaltic hose pump can also be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, papermaking and other industries.

High efficiency production of mine cement peristaltic pump support custom is a new type of multifunctional multipurpose industrial pump developed by absorbing foreign advanced technologies. Peristaltic pumps for the mining industry completely eliminate the mode of operation of traditional pump impellers and shaft seals, with great advantages in transporting media containing high viscosity, high corrosion, and large fluid impurities. This is a completely different principle from traditional pumps and has a wide range of uses.

The industrial hose pump large flow peristaltic chemical liquid delivery cement is an extremely popular option for pumping slurries with a solids content of up to 80%. The extensive range of chemically resistant hoses now available has resulted in peristaltic hose pump being suitable for handling many of the most demanding chemicals

Large flow peristaltic hose pump for conveying sewage sludge with simple structure, only has pump house, rotor, roller, idel roller, squeeze tube and driving unit. So when use peristaltic pump to pumping the slurry, easy operate and maintenance.Large flow peristaltic hose pump for conveying sewage sludge no seals, no valves, also could self-priming, so when use peristaltic pump to pumping the slurry with low failure rate.

Hose extrusion pump slurry mixing pump peristaltic pump is a new type, multi-functional and multi-functional industrial pump developed on the basis of foreign advanced technology. It gets rid of the limitation of impeller and shaft seal of traditional pump, and uses a completely different mechanism compared with traditional pump. So it is very suitable to transport materials with high viscosity, high corrosivity sulfuric acid and high content of solid particles.

Industrial extrusion cement conveying industrial peristaltic pump group by application: chemical pump, deep well pump, mud pump, sludge pump, drain pump, medical pump, mining pump, food grade pump, foam concrete pump, ceramic glaze pump, cement pump, mortar pump, grout pump, slurry pump, sewage pump, crude oil pump etc.