The refractory gunite concrete machine is specially designed for refractory material spraying, driven by electric motor, with ABB frequency converter, flow could be adjustable according to needs, also equipped with booster water pump and Pre-dampening refractory nozzle to ensure you could use the machine when get it.
The refractory gunite concrete spraying machine Philippines is mainly used for refractory gunning materials and spray coatings in thermal equipment in steel plants.
The refractory gunite shotcrete machine is a continuous running rotor spray gun spraying machine, with a wide range of production capacity, and has been widely verified in the refractory industry. This refractory gunite shotcrete machine is used in places where high requirements are placed on the dust-free and low-wear spray gun mechanical technology of dry-process refractory concrete.
The high quality refractory shotcrete plaster machine driving device is composed of a motor and a reducer. The shaft end of the motor is linked to the drive gear shaft, and after being decelerated by the reducer, the rotor mounted on the output shaft is driven to rotate. After the transmission gear is decelerated by the reducer, it drives the rotor installed on the output shaft to rotate.
The new model refractory shotcrete machine has reasonable structure, humanized design, reliable performance, convenient operation and maintenance, and long service life. No dust, low noise and low rebound rate when working. This new model refractory shotcrete machine greatly reduces the dust concentration near the machine and the nozzle, improves the working environment of workers, and reduces pneumoconiosis caused by dust.
The brand new concrete gunite machine refractory gunite shotcrete has good mechanical properties, no noise, high construction efficiency, low cost of accessories, simple maintenance, time-saving, labor-saving, high efficiency, and labor-saving.
Before the refractory shotcrete machine is officially sprayed, we should first spray the spray gun, adjust the ratio of material to water, and check the degree of uniform mixing, so that there is no dry material or flow on the sprayed surface.
The dry mix spray refractory gunite shotcrete machine uses compressed air to transport refractory materials or similar loose materials through pipelines, control the mixing of water at the end door, and then spray them on the sprayed surface at high speed to condense and harden, thereby forming a material protection layer with a certain strength.
The working principle of the dry spraying refractory shotcrete machine is to put the refractory material into the vibrating hopper, pass through the screen and enter the straight-through material chamber of the rotor, and rotate with the rotor to the discharge port, where it is blown into the rotary by the compressed air from the upper wind path. Then the cyclone introduces another stream of compressed air, which blows and accelerates the material in a multi-head spiral state, and makes it rotate and float, enters the delivery pipe, and mixes with water to spray the sprayed surface when it reaches the nozzle.
When the high efficient mining castable gunite machine is working, the refractory material is added to the vibrating hopper, enters the rotor through the screen, goes straight to the material chamber, and rotates with the rotor to the discharge port, where it is blown by compressed air from the upper air path.
Good quality dry refractory concrete equipment can be used for construction inside and outside walls, water mud sand coating and outside walls thermal insulation material sand scaffolding, refractory material coating.
The hot sale refractory gunite concrete machine has stable performance, convenient operation and maintenance, energy saving and environmental protection, long service life, and can improve the quality of the spray layer.
The hot selling refractory gunite shotcrete machine for refractory protection is a stereotyped product with good quality and durability. There are sufficient accessories for wearing parts such as rotating plates, bonding plates, and spray guns.
Supplier customized refractory concrete shotcrete machine uses compressed air to spray a certain proportion of refractory materials at high speed to form a refractory layer on the surface of the sprayed masonry, because of its remarkable advantages such as fast construction speed, high efficiency, and good engineering quality.
Wholesale Price refractory shotcrete machine in china are widely used in spray lining kilns, boilers, furnaces, steel mills, cement plants, degassing furnace linings and other refractory materials. Fire-resistant sand sprayers are used for thermal and cold repair of vacuum-degassing furnace linings.
Refractory spraying gunite machine for blast furnace is mainly used for thermal spraying of the refractory layer of industrial furnaces. It is mainly suitable for concrete spraying and supporting the construction of medium coal tunnels, culverts, subways, hydropower projects, underground projects, mine roadways, highway slope protection, etc. and the thermal gunning operation of the refractory layer of the industrial furnace.
The slop protection refractory concrete gunite machine has the functions of stirring, conveying, and spraying; the watering quality is good, the construction speed is fast, and labor is saved. The slop protection refractory concrete gunite machine can be used for gunning metallurgy and industrial furnaces and is widely used in steel mills, etc.
Small portable refractory shotcrete gunite machine is mainly used for hot gunning or cold gunning of electric furnaces, converter steel refining industry, and various molten steel tanks. Small portable refractory shotcrete gunite machine is currently a gunning machine suitable for domestic kilns.
Supplier customized refractory spraying gunite machine is a new type of repair tool for the industrial furnace wall jointly developed with the more advanced gunning furnace wall thermal repair technology on the market today. Supplier customized refractory spraying gunite machine is the most advanced cold and hot repair equipment in the same industry today.
Refractory gunite shotcrete machine with Ce Certificate is a model designed and developed for furnace repair with large gunning amounts. Refractory gunite shotcrete machine with Ce Certificate also used for furnace lining repair of large converters, electric furnaces, and blast furnaces in metallurgical enterprises.
