CLC peristaltic pump for pumping foam concrete

Wodetec Equipment as the supplier and manufacturer of CLC peristaltic pump for pumping foam concrete for many years. CLC peristaltic pump for pumping foam concrete uses copper impellers, and explosion-proof motors provide excellent explosion-proof effects.

CLC peristaltic pump for pumping foam concrete are widely used in dangerous environments such as oil exploration, oil training, chemical and military industries, and in dangerous areas such as offshore oil platforms and tankers, and for lighting scenes. The peristaltic pump for pumping foam concrete currently on sale are the best prices, welcome to contact us! Email:sales@wodetec.com 

CLC peristaltic pump for pumping foam concrete (also known as peristaltic pumps, squeeze hose pumps, and industrial hose pumps) work by squeezing the hose with rollers or sliders. The pump operates dry and self-priming and can handle high viscosity, high wear media.

Features of the CLC peristaltic pump for pumping foam concrete:

1. Strong self-priming capacity, maximum 8m purified water suction range. Used as a self-priming pump.

2. Since there is no unique structure and seal, there is no leakage or leakage of self-priming pump even when the site management requirements are high.

3. Can transport corrosive slurry pumps and sludge pumps that are high in particles, fibers and other impurities.

4. Due to the low flow rate of the medium and no shear force, it is especially suitable for carrying materials that are sensitive to shear force.

5. Can transport high-viscosity media and 3-phase mixed media of gas, liquid and solid.

CLC peristaltic pump for pumping foam concrete  range of use:

CLC peristaltic pump for pumping foam concrete are particularly suitable for corrosive media with high solid content and high viscosity and have self-priming performance. Used in industries such as smelting (gold, silver, copper, lead, zinc, tin, nickel, cobalt, manganese), phosphorus compound fertilizers, titanium dioxide, rare earths, desulfurization, environmental protection, water treatment, papermaking, paints, etc. 

Before the peristaltic pump for pumping foam concrete is activated, make the following preparations before starting it.

1. Check if the reducer lubrication in the pump cavity is sufficient.

2. Make sure that the pump inlet and outlet pipes are properly installed and secured. Whether the bolts on each flange are tightened.

3. Make sure the pump inlet and outlet valves are all open.

4. Press the start and stop buttons to start the pump, check if the rotation of the motor matches the inlet and outlet of the pump, and check if the pump is stuck. If all the above checks are correct, you can start the test operation. If there are no abnormalities in all aspects, it can be operated normally.

If you are interested in the CLC peristaltic pump for pumping foam concrete, please contact us! Email:sales@wodetec.com