Peristaltic industrial hose pump for sale

Peristaltic industrial hose pump for sale belongs to the category of peristaltic pumps. The peristaltic industrial hose pump is a type of rotary positive displacement pump. They are named because they function like the gastrointestinal tract to transport gas, solid and liquid three-phase media. There is no strict distinction between mud-fed small hose pumps for slurry grout and peristaltic pumps. Generally speaking, peristaltic pumps refer to small flow rates (ml / min) and low outlet pressures (3 kg / cm2 or less) and are mainly used in the fields of health and laboratory measurements.  Peristaltic hose pump for sale refer to high flow rates (up to 80 m / h) and high output pressures (up to 16 kg / cm2) and are primarily used for high flow transmission and industrial measurements.

Designers and users of peristaltic industrial hose pump for sale first evaluate their ability to carry highly abrasive media. There are no valves or seals. Only the internal cavity of the rubber hose comes into contact with the medium. The rotor of the peristaltic industrial hose pump grout is completely independent of the medium. In addition, hose pump for sale has many unique features. No other peristaltic industrial hose pump has as good a self-priming capacity as a hose pump for slurry pumps that can generate an almost complete vacuum for sucking liquids. No air resistance. It also has the advantage of carrying highly viscous shear sensitive media. The fixed capacity per revolution is a natural weighing pump that has nothing to do with the outlet pressure.

How to solve these problems? Then answer each question.

1. The rupture of the throttle pipe is due to excessive pressure at the pump outlet. Must be the entire transport pipeline or the front end of the transport. If the outlet pressure of the small hose pump for slurry injection still exceeds the rated pressure, it is necessary to adjust the gap between the squeeze wheels to increase the gap between the squeeze wheels and reduce the working pressure.

2. Insufficient flow rate means that the discharge flow rate of the small hose pump for slurry grout is less than the work flow rate requirement. This is because the gap between the squeeze wheels is rather large, but the amount of interference when the pipe is squeezed during work is small, and the flow rate at the outlet does not decrease because only the backflow of the transport fluid is present. If necessary, the gap between the squeeze wheels should be adjusted and reduced.

3. The pressure at the outlet of the small hose pump  cannot reach the pressure required for the work. At this time, the more material that returns directly from the squeeze tube, the more the squeeze wheel gap needs to be adjusted to avoid meeting the work requirements. If it is smaller, increase the squeeze interference of the squeeze tube to increase the pressure.

If the squeeze tube wears faster than normal, there is a possibility of abnormal wear. At this time, first lubricate the squeeze tube, apply lubricating silicone grease regularly, whether the squeeze wheel and recovery wheel are rotating normally, and whether the squeeze wheel or recovery wheel is clogged or cannot rotate normally.

If you are interested in the peristaltic industrial hose pump for sale, please contact us! Email:sales@wodetec.com