Refractories spraying machine for cement kilns

The refractories spraying machine for cement kilns uses compressed air to spray out a certain proportion of refractory materials at high speed to form a refractory layer on the surface of the sprayed masonry. Because of its rapid spray construction speed, high efficiency, and good engineering quality, it is Widely used, mainly suitable for: thermal gunning of the refractory layer of industrial furnaces. It is mainly suitable for concrete spraying and supporting construction such as tunnels, culverts, subways, hydropower projects, underground projects, mine roadways, and highway slope protection. And thermal gunning of refractory layer of industrial furnace.

Features of refractories spraying machine for cement kilns:

1. The refractory shotcrete machine has the functions of mixing, conveying and spraying.

2. The concrete pouring quality is good, the construction speed is fast, and the labor is saved.

3. Gunning metallurgy and industrial furnaces are widely used in steel plants.

4. The refractory shotcrete machine is a stereotyped product with good quality, and spare parts such as rotating plates and bonding plates are fully stocked.

The refractories spraying machine for cement kilns uses compressed air to spray out a certain proportion of refractory materials at a high speed to form a refractory layer on the surface of the brickwork. Because of its rapid construction speed, high efficiency, and good engineering quality, it has significant advantages. Widely used, mainly suitable for: hot blast repair operation of industrial furnace refractory layer. It is mainly applied to the construction and application of concrete spraying and supporting for tunnels, culverts, subways, hydropower projects, underground projects, mine roadways, and highway protection slopes, as well as the thermal spraying repair work of industrial furnaces and refractory layers.

Features of refractories spraying machine for cement kilns:

1, with stirring, conveying and spraying functions.

2. The quality of concrete pouring is good, the construction speed is fast, and labor is saved.

3, spray repair metallurgy and industrial furnaces, widely used in steel mills, etc.

4. It is a stereotyped product with good quality and durability. The spare parts such as rotating plate, combination plate, spray gun and other spare parts are well stocked.

The refractories spraying machine for cement kilns is also equipped with a high-pressure water pump, which is used to provide high-pressure water for the new pre-damper nozzle assembly. There is a water ring in the nozzle assembly, and the high-pressure water is atomized through the small holes of the water ring. If so, water can even be mixed with the material to achieve the best spray effect. The ABB frequency converter is used to adjust the motor speed and further control the output of the refractory dispenser from 1m³/ h to 5m³/ h. When the machine starts to work, the small output can effectively avoid the blockage caused by the large output.