Refractory shotcrete machine for copper smelter

Refractory shotcrete machine for copper smelter uses compressed air to spray out a certain proportion of refractory materials at high speed to form a refractory layer on the surface of the sprayed masonry. Because of its rapid spraying construction speed, high efficiency, and good engineering quality, the refractory gunite machine for copper smelter mainly suitable for: thermal gunning of the refractory layer of industrial furnaces and kilns. It is mainly suitable for concrete spraying and supporting construction such as tunnels, culverts, subways, hydropower projects, underground projects, mine roadways, and highway slope protection. And the thermal gunning operation of the refractory layer of industrial furnaces.

Features of refractory shotcrete machine for copper smelter:

1. The refractory shotcrete machine for copper smelter has the functions of stirring, conveying and spraying.

2. The concrete pouring quality is good, the construction speed is fast, and the labor is saved.

3. Gunning metallurgy and industrial furnaces are widely used in steel mills.

4. It is a stereotyped product with good quality and durability. The wearing parts, rotating plate, bonding plate, spray gun and other accessories are adequately stocked.

Matters needing attention when we using the refractory shotcrete machine for copper smelter:

1. For areas with over-excavation or cracks and low recesses, the spray should be sprayed first, and then sprayed normally.

2. It is strictly forbidden to aim the nozzle at the personnel.

3. During the spraying process, if there is a pipe blockage, wind or power failure, etc., the water gate should be closed immediately, and the nozzle should be placed downward to prevent the flow into the feed pipe; when handling the blocked pipe, the percussion method should be used to feed the feed pipe.

4. The sprayer must wear dust masks, latex gloves and glasses.

Preparation work before using the refractory shotcrete machine for copper smelter:

1. Check whether there is any leakage of wind and water in the feng shui pipeline for spraying, and deal with it in time.

2. Check the wear and tear of the conveying pipeline, and repair or replace if any problems are found.

3. The conveying pipeline should be smooth and free of dead bends or hard bends to prevent blockage of the pipeline or serious wear of the pipeline.

4. Check and clean up the debris in the silo.

If you are interested in the refractory shotcrete machine for copper smelter, please contact us! Email:sales@wodetec.com, and we can send the price and more details for you.