Shotcrete spraying machine for swimming pool uae
Shotcrete spraying machine for swimming pool uae is the equipment used for shotcrete. It features a reasonable structure, stable performance, convenient operation and maintenance, and a long life.Shotcrete spraying machine for swimming pool uae are widely used in mines, tunnels, culverts, subways, and slope supports. Construction of shotcrete for protected roads, hydraulic engineering, underground engineering, coal mining high gas mines.
Shotcrete spraying machine for swimming pool uae uses compressed air to carry a constant proportion of concrete mixture into the pipeline and spray it at high speed onto the sprayed surface to harden it and form a concrete support layer. In recent years, sprayed concrete technology has been widely used in fields such as construction, railway tunnel construction, tunnel construction and slope reinforcement due to its simple technology, effectiveness, economic cost and rapid construction speed.
Precautions when using the shotcrete spraying machine for swimming pool uae:
1. If the transport pipe is clogged, switch it to the manual position, turn on only the air compressor, remove the joint in front of the pump head, shut off the spray and increase the wind pressure. Generates back pressure and reduces transport. The remaining slurry in the tube is blown away. After installing the joint, you can start normal operation. If the pump pressure is insufficient during work, you can adjust the booster stator bolts or replace the booster rubber sleeves and booster screws.
2. Workers must wear safety helmets, protective goggles, work clothes and other labor protection products during sandblasting. It is strictly forbidden to start idling when there is no water or material in the hopper. If mortar is generated during long hours of work If the transmitter overflows or makes a strange noise, immediately stop the inspection, replace the mechanical seal, and perform maintenance and repair to prevent damage to the equipment. Please give me.
3. When spraying, the nozzle should be as perpendicular as possible to the spray surface and the spray distance can be adjusted according to the spray effect. It should be sprayed evenly in layers and coordinated with the flattening process. If the walls are too dry or the spray is too long, it will have a serious effect on the flattening effect. Intelligent operations of operations require changes in operating procedures and processes at any time. If the mortar is too thick or the resistance of the machine is too high when the machine is idle, the load on the motor can easily increase. In the event of abnormal noise or clogging of pipes, the machine should be stopped immediately for inspection and the concentration of mortar in the hopper should be adjusted.
If you are interested in the shotcrete spraying machine for swimming pool, please contact us! Email: sales@wodetec.com