High flow rate peristaltic pump with rubber hose
October 26, 2020
High flow rate peristaltic pump with rubber hose
The high flow rate peristaltic pump mainly completes the pumping process by alternately pressing the first rubber hose. When the peristaltic pump with rubber hose works, it is like squeezing out a hose filled with liquid with two fingers. When the fingers move, negative pressure will be generated inside the hose and the liquid will be pumped forward. The peristaltic pump is mainly composed of a driver, a hose and a pump head. The hose is installed between the pump head and the driver and moves by means of squeezing between the two. The high flow rate peristaltic pump with rubber hose has been widely used in chemistry, mining, metallurgy, paper making, paint industry, food industry, ceramic industry, petroleum industry, water treatment and pharmaceutical industry from the previous laboratory application.
Due to its unique design structure, the high flow rate peristaltic pump can pump abrasive, corrosive or viscous materials. The peristaltic pump has good air tightness. When the material is pumped by the peristaltic pump, since it only contacts with the hose, it can avoid contact with foreign substances and increase the degree of safety and sanitation. The high flow rate peristaltic pump with rubber hose has a gentle pumping effect and can pump relatively fragile materials. It can be seen from the working process of the peristaltic pump that the only structure of the peristaltic pump in contact with the outside world is the rubber hose. Even if the peristaltic pump is damaged, we only need to replace the rubber hose.
The high flow rate peristaltic pump deadline is usually 7 to 10 years, the use of one of the decisive role is the quality of the hose, common types of hose to have excellent antiwar properties of natural rubber, oil, lubricating oil, alkaline liquid NBR and detergent, have excellent wear resistance can be conveying acid and alcohol of ternary ethylene propylene rubber. We also provide high pressure hose with excellent wear resistance, steel wire reinforced inner layer, can withstand up to 3MPa.
Compared with other types of pumps, the unique performance of the high flow rate peristaltic pump is that have their own absorption function. Peristaltic pumps can pump solid, liquid and gas three forms of substances. Air resistance and high resolution can be avoided when transporting liquids and gases, and media sensitive to transport units also have this advantage.
The peristaltic pump with rubber hose has the following functions:
1. There are no sealing parts, so it can be dried and used as a vacuum pump.
2. The pumped material will pass through a dedicated hose and will not contact the pump head or driver. The pumped material will be more hygienic.
3. Regardless of the discharge direction, as long as it is transferable, the residue in the discharge pipe can be reversed, and the material is easily discharged.