Peristaltic pump for wastewater treatment

Peristaltic pump for wastewater treatment

The peristaltic pump for wastewater treatment is mainly composed of a driver, a pump head, a hose, etc. The hose is the only part that is in contact with the material being pumped. So only the hose needs to be replaced during maintenance and replacement. The peristaltic hose pump for wastewater treatment has good sealing performance; it can be dry running and other characteristics.

The peristaltic pump for wastewater treatment transports solid gases, liquids and impurities in the waste water treatment process, and shows excellent performance in waste water treatment. The traditional sewage treatment pump filters the sewage and then removes impurities through the filter. Therefore, the following two problems will occur in the wastewater treatment process. First, the waste of water .In the water treatment process, the percentage of solid impurities in the water is very small. Conventional hose pumps require a lot of water for treatment and transportation during the treatment period, which will cause a certain waste of water resources. Second, damage to the pump .After a full day of work, the sewage pump usually leaves many solid impurities and requires a lot of clean water to clean them. The production of a large amount of solid impurities directly affects the normal operation of the hose pump, and increases economic losses.

The peristaltic hose pump for wastewater treatment can well overcome the above problems. The peristaltic pump for pumping wastewater can directly pump sewage without consuming a lot of water resources. Second, due to its unique structural characteristics, when pumping sewage, only the hose is in contact with the peristaltic pump, so it will not cause damage to the pump body. When impurities are deposited, only the hose needs to be replaced, which greatly reduces the cost. 

  

According to a recent study, wastewater will not only affect people's drinking water problems, but even damage crops and vegetation. The solution suggested by local experts is to add lime and/or calcium sulfide to the wastewater for pre-treatment, and then carry out sludge treatment. This will ensure that the treated water is suitable for introduction into nature. Although not necessarily suitable for human consumption, it has also achieved certain levels. When considering pump selection for a specific application, the nature of the pumped medium is an important factor. High-viscosity media usually causes pump blockage, and peristaltic hose pump for wastewater treatment can solve this problem well.

Improving the PH of water is a very special process, and the pump used to deliver the drug must be very precise. Peristaltic hose pump for wastewater treatment can provide the most accurate solution. The peristaltic pump for pumping wastewater can accurately pump medicines to ensure perfect results.

Peristaltic pumps can be used not only for sewage treatment, but also for paper industry, food industry, brewery, mining industry, etc. If you are interested in peristaltic pump for pumping wastewater, you can contact us.