Refractory Spraying Machine for Sale In Vietnam
The WZ-3ER refractory shotcrete machine produced and sold by WODETEC is a rotary-wing shotcrete machine, which is widely used for spraying refractory materials and can be poured into steel plants. Compared with the traditional dry-mix shotcrete machine, the new WZ-3ER refractory shotcrete machine is specially designed for spraying refractory materials. Equipped with ABB inverter, high pressure pump, new pre-dampening nozzle assembly, etc. ABB drives are used to control the speed of the rotor and adjust the output power from 1m3³ / h to 3m³ / h. WZ-3ER refractory jet machine is equipped with high-pressure water pump, which can provide atomized high-pressure water to mix water and materials.
WZ-3ER refractory shotcrete machine is different from ordinary dry-mix shotcrete machine. It has an ABB frequency converter, a new pre-dampening nozzle assembly, a high-pressure water pump and a high-pressure water pump for refractory cannon machines, which can provide atomized water for atomized high-pressure water. Mix water and materials. The ABB driver is used to adjust the output from 1m3 / h to 3m3 / h. If there is a greater output capacity at the beginning of spraying, the material will block the transfer hose. The high-pressure water pump is used to supply high-pressure water to the nozzle assembly. Pressurized water enters the nozzle through the water ring and becomes foggy, which helps to mix the material and water evenly. The new pre-damper nozzle assembly needle valve can precisely adjust the amount of added water. It can effectively reduce the amount of added water. In addition, unlike traditional sprayer nozzles, the new nozzle has flexibility and reduces springback.
At the same time, the sealing plate of WZ-3ER refractory spraying machine is different from the sealing plate of ordinary dry mixing spraying machine. The conventional sprayer sealing plate has drain holes, while the refractory spray gun sealing plate does not have drain holes. As we all know, refractory or castable materials are much more expensive than ordinary concrete, so no ventilation holes are needed. Sealing plates are very important spare parts for shotcrete machines. We choose better quality sealing plates for the machine.
Thai customers have purchased WZ-3ER refractory shotcrete machine from our local steel mill for casting steel mill. At the work site, refractory materials are usually loaded and cast into big bags. In order to save labor, there is a large hopper for filling refractory materials, through which the material passes through the hopper of the refractory spraying machine, thereby avoiding the trouble of manually adding materials.
Wodetec is a professional manufacturer of refractory shotcrete machines. The high-tech refractory shotcrete machine with 20 years of experience has been exported to many foreign countries, and has gained customers in Singapore, Malaysia, Qatar, Mexico and other countries. Better feedback. We have other models that can meet the needs of different projects in different regions. Considering that many customers' local voltage is different from ours, Wodetec can also customize the appropriate voltage according to the customer's local voltage.